Jump to content
SAU Community

Recommended Posts

So my gtr has leaking injectors, a few pretty badly. The nissan dealership that is checking out my car has told me I require new ones? I thought I would beable to change the o rings once I remove the injector is this true? if so anyone have the partnumber and or other items I will need to replace. Thanks in advance for any information provided.

Johnny

Link to comment
https://www.sau.com.au/forums/topic/83709-fixing-leaky-injectors/
Share on other sites

So my gtr has leaking injectors, a few pretty badly. The nissan dealership that is checking out my car has told me I require new ones? I thought I would beable to change the o rings once I remove the injector is this true? if so anyone have the partnumber and or other items I will need to replace. Thanks in advance for any information provided.

Johnny

"Leaking injectors" doesn't usually mean leaking outside the engine, it usually means leaking fuel into the engine. This is not a good thing, as you can get hydraulic lock if too much flows lays in the engine (say overnight). When you turn the starter motor next morning you can easily bend the conrods (petrol does not compress). Changing O'rings will do nothing for that. It is easy to confirm, just stick the injectors on a flow bench and see how much fue lcomes out when they are closed.

The normal course of action is to get the injectors cleaned as most time the pintle is kept open by a build up of gunk from the petrol used. A good overnight ultrasonic clean will generally fix this. Then they can be retested on the flow bench to make sure they are not leaking. Cost about $20-30 per injector.

Hope that helps

:rolleyes: cheers :P

So my gtr has leaking injectors, a few pretty badly. The nissan dealership that is checking out my car has told me I require new ones? I thought I would beable to change the o rings once I remove the injector is this true? if so anyone have the partnumber and or other items I will need to replace. Thanks in advance for any information provided.

Johnny

I've had leaking injectors in mine and new O Rings and seals didn't fix the job. they were leaking out of the 'body' of the injector. You could physically see the fuel seeping out of the injector. I ended up getting a set of late model GTR injectors from a wrecker and with all new seals (there's 3 for each injector and total cost is about $170) from nissan and all is good.

Dont get new RB26 injectors from nissan because when I was loking at doing that they wanted $270 each!! For that price you can get a set of bigger SARDS or NISMO's etc.

Good luck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
    • Hmmm, interesting. Makes me wonder whether there is bias as well. It's the cheapest fuel, so it is used for all kinds of ill-maintained shitboxes which are bound to have issues regardless. Nicer cars tend to require higher octane rated fuel and can't use it anyway. FWIW, the official NSW E10 facts page is decent. 
×
×
  • Create New...