Jump to content
SAU Community

Recommended Posts

I was considering to buy a genuine Bosch 040 or 044 fuel pump, but my question is are these compatible with Stageas?

Is the 044 an external pump? Where would i mount it?

I would plan to do it myself, or would it be best to get someone to install it for me?

Thanks anyone,

Also, should i consider a fuel pressure regulator? OBX or Sard type of a thing..

Link to comment
https://www.sau.com.au/forums/topic/83753-fuel-pumps-what-are-my-options/
Share on other sites

What makes you assume it will fit?

I bought a 2nd hand catback exhaust for a R33 GTST...guess what...it didnt fit (regardless of what everyone is saying about them fitting)

mate its pretty obvious the stagea is alot longer than a r33 gts-t :P

and with the fuel pump issue, in mine i went the 044 external fuel pump and two goss little ones for the intank duties, i mounted the 044 with a bracket off the diff cradle...

few pics are below :)

Brad

post-20455-1123767605.jpg

post-20455-1123767783.jpg

What makes you assume it will fit?

I bought a 2nd hand catback exhaust for a R33 GTST...guess what...it didnt fit (regardless of what everyone is saying about them fitting)

I don't know anyone that has said an R33GTST cat back exhaust would fit, that would be crazy considering the extra length of the waggon. I have checked out the dump and engine pipe and they will fit, as will the cat of course. But from there back, no chance.

As for a fuel pump, any of the usual Skyline fuel pump upgrades will fit with exactly the same problems/advantages. The standard pump should be good for 200 4wkw, so I don't believe I will have to change it for my power target. But, just in case, I have an R33GTR pump standing by which will be OK for 265 4wkw at 12 volts (standard wiring) and 350 4wkw at 13.8 volts (using a relay and dedicated wiring from the battery).

Hope that is of some help

:) cheers ;)

looks a bit dangerous.. fuel lines near the exhaust.. and is that cable tie the only thing holding it there and stopping it from banging around???

the pump and lines are about 300mm from the exhuast and the pump is bolted onto the u bracket off the diff cradle, the zip tie is holding the fuel filter above it as i havent been able to find a mounting position yet (lack of room and time)

cheers

Brad

Brad

Just a question - are you using the cable ties to hold the goss pumps to the bracket inside the fuel tank?

Doesn't the fuel dissolv ethe plastic?

I've always been stumped on what to use to hold the fuel pump when doing a replacement. I was thinking of using a hose clamp.

Brad

Just a question - are you using the cable ties to hold the goss pumps to the bracket inside the fuel tank?

Doesn't the fuel dissolv ethe plastic?

I've always been stumped on what to use to hold the fuel pump when doing a replacement. I was thinking of using a hose clamp.

yer i am using cable ties, and i been told they are fine to use, as the workshop i did mine through use them on all their car fuel pump upgrades :)

maybe they might breakdown in a few years but ill keep a regular check they are ok :(

I have head of quite a few zip ties doing the trick as well, that is the fuel resistant ones :)

In regards to the rear exhaust fitting I haven't heard anyone say it would, but there are many that will vouch the dump pipe will..

In regards to your fuel pump questions, if the stagea uses the same pump setup as a R33, we have some genuine Nippon Denso 260L per hour pumps that fit in with barely any changes at all!

In regards to the bosch pumps the 044 is an external pump and the 040 an internal pump..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...