Jump to content
SAU Community

Recommended Posts

mustve been something wrong there for a ringland to go in a rb20det....what caused it, if i may ask?

Im not too sure, there was a bit of pinging involved im guessing.

Im not too sure yet if its a ring land, but its suspected, as there is alot of oil getting straight into the bore, and getting burnt up causing a bit of smoke.

My old man is ping tone deaf. :P

He held it down in his EF Fairmont some time back and it was rattling its head off. I was like aaaaahhhhhh stop.... Its pinging its head off, No wonder its blowing smoke in the revision mirror.

I can't hear it pinging he said. :)

my guess is somebody thrashed the pants off it running silly high boost and stock ecu, as seems to be all the rage these days.

you can use but you'll have to swap all the sump and things over as that has your front diff in it, whereas on RWD it doesn't.

do a search and you will find some info..

To your original question - the sumps are different between the RWD and AWD versions of the RB20DET - you can't swap sumps between the 2.

I just happen to have a RB20DET from a GTS4 sitting on the garage floor (in Melbourne). PM me if you are interested.

I had one let go, but only because it blew a water hose.

I've had a ring-land go, big time (on another RB20DET, not the one I offered you). Chunk of piston hit the end of the sparkplug and shut the gap right down, then shot peened the combustion chamber and top of the piston. Broke a ring, and bent it upwards. Engine ran on 5, sounded like a chaff cutter. Amazingly, the bore is still perfect.

I had one let go, but only because it blew a water hose.

I've had a ring-land go, big time (on another RB20DET, not the one I offered you). Chunk of piston hit the end of the sparkplug and shut the gap right down, then shot peened the combustion chamber and top of the piston. Broke a ring, and bent it upwards. Engine ran on 5, sounded like a chaff cutter. Amazingly, the bore is still perfect.

And how did you's run on the 5 cylinders? Much smoke out of exhaust? Mine blows abit when u free rev it some times... the radiator israther bubbley..

Hey mate, I have a R32 GTS4 motor sitting in my garage, it has the head off of it, comes with front diff, basically consists of:

block with pistons in it

head complete

plenum

coilpack and injectors

I am in Brisbane also. I am moving interstate in a few weeks so I want it gone. I have it advertised in the forsale section but am quite neg on that price. pm me if you are interested.

Stephen

Did a comp test on the motor today, #1 is holding 50psi, which is not a very good sign, so its time for replacement pistons.

gts4diehard: Cheers buddy, but ive got a spare rb20det block sitting here, gonna replace damaged pistons, put in new rings, and bearings also.

Thanks for the help guys.... will let you's know how i got next weekend when it gets ripped apart...

PS: I moved away from mitsubishi's hoping i wouldn't have to touch motors again... little did i know.. nissans are just as bad.. hehehe..jks..

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...