Jump to content
SAU Community

Recommended Posts

Clearing out my garage... LIST UPDATED

RB20DET Silvertop-

*Complete Head (Hydrolic Lifters, shaved and O-ringed) $200

*Bottom end (crank shaft, Bored for 50thou oversized pistons) $200

*Copper Head Gakset (perfect condition) $100

*Shot-peened Conrods $50set

*Air Con Compressor $100

*Power Steering Pump $100

Other Gear

*S13 Silvia/180SX Stock Castor/Radius rods (pair in perfect condition) $80

*S13 Silvia/180SX/R32 Tein Castor rod (1only in good condition) $50

*Duel Stage boost controller with incabin switch - SOLD

*18" Chrome BSA rims 3 of - $200 each (no longer make so perfect for someone who has cracked one as i did haha)

*2 10" Kicker subs in box - SOLD

*Kicker 12" subwoofer in Kicker ported box - AS NEW $150

*Sony Xplod CD/MP3 player with remote etc - SOLD

*Jaycar Responce amplifier 2X100WRMS $100

*Jaycar Amp and Kicker 12" sub together for $220 (perfect match, the pump together)

*Blaupunkt Acapulco CD/MP3 player 2 weeks old, perfect condition- RRP $659 - $250

I have pictures of all items so if your interested in anything just ask and i can send you pictures or give you more info if i can (eg measure ments etc or what ever you need) just let me know...

Post here, PM me, or email [email protected]

Edited by osiris23

Ulladulla... NSW south coast. about 3 hours south of sydney...

Monster Tacho SOLD

Pending payment for Radius rods.

Anyone interested in anything?

2 10" kickers sold...

12" kicker in kicker ported box for sale - $150 in perfect condition.

Prices are all negotiable so let me know if your interested in anything.

  • 2 weeks later...

hey im not 100% sure of the thickness of the head gasket but im pretty sure its 20thou... not sure of the compression...

RB20 head price frop to $200

RB20 Bottom end price frop to $200

$350 for the both..

CD player and boost controller SOLD.

well it was from my 180 and it was pretty highly modified... GT2840 turbo etc and was running 20pound boost and it might have leaned out or something not sure and cracked a ring lan on the 1st pistion, had some detonation on number 1 and 3.... so yer it didnt actually kill it, it wasnt bad enough that it wouldnt drive still it just deloped really bad blow by and then after pulling it apart we found the piston the way it was.... it didnt stuff the bore or anything though and as said is bored out for 50thou over sized pistions, I have all 6 pistons still if it would help at all but ofcause 1 is worthless...

If your interested or anyone else is interested ill do the head, bottom end, copper head gasket, conrods plus other parts i have laying around for say $450.... Bargin seeing justjap wanted $1300 for a head and bottom end, nothing else just stock...

[email protected] if your interested..

About 1½ months but stored well....

I have someone most probably comeing this weekend for the whole lot so i guess we'll see after this weekend...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
×
×
  • Create New...