Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm organising some number plates for my freshly complianced R32GTR.

I'm getting some standard sized plates, but was wondering if anyone know what the legalities were concerning stick on plates for the front? I've seen cars with the stick on's driving around, and think it would be a good idea so I don't block airflow to the intercooler. I also don't want to be drilling holes in my bumper.

If anyone has any (reliable) information about this, that'd be great.

I've requested a copy of the number plate legislation from Transport SA, but I'd be really keen to know from ppl who have the stick on's if you've been hassled by the cops etc.

Cheers,

Alan ;)

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/
Share on other sites

Any number plate not manufactured by a Transport SA approved manufacturer (I think there's only 1 in SA) is 100% illegal.

I'ven been warned for plates before on a previous car, so I did some research. Basically only the ones they issue are ok.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1528997
Share on other sites

Only plates made by an approved manufacturer comply with the requirements of the Motor Vehicles Act. The display of non-approved plates incurs the risk of a Traffic Infringement Notice and a fine.

Plates must be visible from the front and rear and must not be obscured by a tow ball, load, plastic cover, dirt build-up or any part of the vehicle’s bodywork. Operating a vehicle in this condition renders the driver liable to receiving a Traffic Infringement Notice.

Got this off their site for you.

Couldn't find a list of "approved manufacturers" though.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1532137
Share on other sites

I received the actual legislation for this today as well.

Pretty much what you've found on the website.

So now we all *know* it's illegal, but is it worth taking the risk to do it?

What are the ramifications of a Traffic Infringement notice? Fine? Demerit points?? Defect and Regency inspection?

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1532492
Share on other sites

The number plates transportsa issues don't fit. :(

On the R32 you are required to either bend the edges or trim them. Mine were trimmed neatly, obviously this is illegal but what else can we do?

I haven't been pinged for it as they are trimmed in such a manner its hard see unless you get down on your knees.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1535346
Share on other sites

OK how about this question:

Do the authorities target cars with any form of personalised plates?

I currently have a set of premium plates on my MX-5 with some nice lucky numbers (superstitious asian stuff). I can simply transfer these across to my GTR if this is going to be an issue.

I did get a nice set of plates for the GTR tho, something related to "RB26" :(

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1535403
Share on other sites

well, the short answer is yes they do (as told to me by a forum member on NissanSilvia.com who is a copper), however I have distinctive peronalised plates and have not been targeted.

In fact for the extremely large amount of time I spend on the road, it is a wonder I never get pulled up. The only very few times I have been pulled over I brought it on myself and deserved it. However, I am not out cruising the hotspots Friday and Staurday nights .... that is just begging for trouble.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1535412
Share on other sites

you can get transport SA approved plates for your push bike rack that goes on your towbar right... those little ones about half the size.

Correct me if I'm wrong, but the legislation doesn't mention size does it? Order 2 bike rack ones and use them :)

and put them on upside down....

I'm sure the legislation doesnt say anything about this...

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1538674
Share on other sites

I thought of that already, but unfortunately the legislation *does* specify the size of the plates.

You could always play dumb and do the "sorry officer, I didn't know" routine, but I doubt that's going to get you off more than once.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1538709
Share on other sites

Not sure about the bike rack number plates, prob a bit of a flaw in the system there, but i'm sure they could get you on it somehow, best to just get the slim plates and not worry about it.

I couldn't be bothered paying $170 or what ever it is a year for custom plates so i ended up getting R and S series plates, think it was $70 for ever, and i can swap to what ever car i want. Works out well with the RB and SR.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1538712
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...