Jump to content
SAU Community

Recommended Posts

Its that time of year again last year I celebrated my birthday at the WSID cause it was a Wednesday night 25/8 but this year its Thursday so still going to race next Week

also Have to beat my elusive 13.6 which i did almost a year ago SEPT 01/04

any one else looking at coming down for the racing not my B'day

Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/
Share on other sites

haha, johnny you sly dog! you should have said something, i would have come out, though i may be a bit of a curse...

Good work, that certainly is a bloody quick time, now hang up this drag sh1t and get back to the track.

Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1543883
Share on other sites

I dare say it but the slot car has high 9's written all over it. I seen all 4 runs and every single gear was just massive wheel spin. The best launched gave the 10.7sec pass and even that was all over the place!

Bad decision to go racing last night though (or for atleast the next month) as the track was re-surfaced about 10 days ago and it appears to be like driving on ice. Even the professional teams at last sunday's 'Bracket Attack' were complaining how useless the track was (and many drivers were shutting off after 2nd gear).

Not sure why John was using grooved drag tyres though rather than full slicks?

Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1544065
Share on other sites

I could not even begin to compare to the slot car but i was happy reset my PB 3 times from 13.6 to a 13.437 to a13.394 to a 13.354 @103MPH

with the car in everyday trim nothing removed other than the spare tyre

Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1544390
Share on other sites

Ben, the HPI records list might have something to do with the use of a drag radial:

http://www.hpi.com.au/drag_records.php

From that MPH, the 300 is capable of being no.1 and a flat 10, high nine is possible.

Alot of cars were getting loose last night, as were the bracket meet cars on Sunday. Apparently due to the resurfacing of the track last week.

Edited by NXTIME
Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1544404
Share on other sites

Those RWD over 2400cc times look quite high to me, 11.2sec nets you 10th place.

Adrian isn't too far off that and he has an unopened engine running a standard engine.... what is everyone else doing with their money???

Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1544787
Share on other sites

Those records are old, although i have heard that he was going for the fastest drag radial

They are a bit behind as they print a few months behind.

Ran a 10.709 139.67mph, cold night still had circuit set up as did not have time to change springs or even raise the car or adjust camber which was neg 1.4 and car was on the deck so not good for weight trasfer to rear and would not squat much. We only raced on Sunday at E Creek circuit and alternator failed which we changed on the Monday. My guys have been so busy with customers cars that we did not have time to do what we wanted and lucky to have made the track as the motor was sold and coming out on the Thursday at short notice and yes buyer was aware it was goign to the track. Traction was our biggest problem this time as the car had HEAPS of power. First two runs I smoke four gears and even grabbed fifth and went over the line spinning the wheels. With a warmer night and better set up, and with the power it makes it should do a low 10.

As testimony to our clutch just one of our single plate clutches and done heaps of track days with a bit over 1300 kg 456.6rwkw was too much for it. Now we have new ones with 1550kg clamp load. Only managed 5 runs as a big oil down and lots of cars and the last two runs I had clutch slipping bad. I ended up in the lane right after the oil down and did a massive wheel spin in third when I suspect I hit a slippery bit and thought I might get to test my new cage. Straightened it up but not a good run.

The motor is out today as planned and sold and on the back of a Ute with one of our engine brackets we make to transport motors and heading up to Newcastle with the new owneras I type. We have the funds now to put together a VQ35, 100kg lighter and will have a lot more power. We will throw together a cheapy VG motor for cicuit days for the short term.

Also got to weigh the slot car for the first time and 1310kg with three quarter of a tank of fuel and with out me in it. This was about what I thought it would be.

Yes running DOT approved street tyres for the HPI comp as well as Sport RWD.

Good to see yo there Benm which you always seem to turn up to motorsports events. A true enthusiast. Beer Baron it is not that I did not invite you it was last minute rush and no time to let you know. I was on the back foot after th false start at the SAU drag day so rather than say yes we are going etc and something comes up we just put our heads down and got there.

Edited by Boosted Zed
Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1545293
Share on other sites

Beer Baron it is not that I did not invite you it was last minute rush and no time to let you know.  I was on the back foot after th false start at the SAU drag day so rather than say yes we are going etc and something comes up we just put our heads down and got there.

now that i think back you did mention it when we were out at EC saying that before the engine went you wanted one last run at the strip. what can i say, beer kills brain cells... true story.

all things considered it was a great time. I'm guessing the replacement alternator cured the low power problem?

Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1546450
Share on other sites

You would expect the HPI website to also not be 2 months behind ;) Although MSRB26 and TWO06L's times were in there not very long after the drag day. I have always preferred for records lists to also include the date on which the time is run, but none of them do this.

Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1546478
Share on other sites

Guest two.06l
I could not even begin to compare to the slot car but i was happy reset my PB 3 times from 13.6 to a 13.437 to a13.394 to a 13.354 @103MPH

with the car in everyday trim nothing removed other than the spare tyre

well done spx25t...... ;) getting a new PB is a good present for yourself for your Birthday. HAPPY BIRTHDAY MATE. :)

Well done Uncle JOHN.

Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1547920
Share on other sites

Hey slow up on the birthdays I don't want them to come around any faster after 41 of them under my belt, mine is 30th June or is this my other life or?

We actually turned down the boost to try and get traction withthe circuit suuspension set up and still did 139.67mph. Wait until the VQ35 much more power again and 100kg lighter, although Sport RWD I think I will have to add weight, currently 1310kg with out me?

How is this for power graph though 5000rpm nearly 400rwkw and 200rwkw plus from 36000 rpm and it rev limited at 8500 which I hit lots going down the straight line thing. Huge power band.

zed456kw.gif

Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1552419
Share on other sites

ummm "uncle John" the birthday wish was for me hahaha

Thanks stace for the wishes I am almost contemplating to see if a set of slicks would help me go quicker before upping the power when fitting the new turbo

Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1557619
Share on other sites

Consistentally in the 1.9 to 2.0 on my quickest pass I have listed it below

60 foot= 1.963

330 foot= 5.606

660 foot= 8.610

1000 foot= 11.173

ET = 13.354

MPH= 103.23

this was on TRX rims (15X5 I think) running cheap tyres Bridgestone G Grid on one and something Ventura on the other.

Edited by spx25t
Link to comment
https://www.sau.com.au/forums/topic/84496-wsid-248/#findComment-1559431
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...