Jump to content
SAU Community

Recommended Posts

Tommyk - PM sent.

blk180 - Thnx for letting me know. I'll keep you posted.

liber8_d - PM sent.

Drift King - Thnx for letting me know. I'll keep you posted.

  • Replies 106
  • Created
  • Last Reply

Top Posters In This Topic

Paul - is it still possible to get in on this for a PowerFC? I have a 1996 R33 GTS-T Series 2.

EDIT - Btw I should add that I am able to make payment immediately if I can get in on this buy. ;)

Edited by Ionos
There is one (R32/R33 GTR) here for immediate delivery. (sorry for the hi-jack) we need a pro and will buy one through you when we sell this one.

http://www.skylinesaustralia.com/forums/in...st=0&p=1533076&

Hi

How can u tell if it's a PRO fc and a standard fc ?

cheers

Hi

How can u tell if it's a PRO fc and a standard fc ?

cheers

The Power FC Pro Spec has been designed for drag racing use. These units have additional functions over the standard version.

*Ignition cut used for rpm limiter - Regular Power FCs cut fuel feed when the preset revolution limit is reached. At high rpm, there is the possibility of knocking when the fuel is cut in high powered cars. The Power FC Pro Spec.CPUs cut ignition at the rpm limit to prevent the

*knocking that could potentially destroy the engine.

0km/h rpm limiter setting - Allows for the setting for an initial rpm limiter that is active whilst the car is not in motion. This allows for mainting a rpm level for consistent launches.

Also the serial numbers :P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...