Jump to content
SAU Community

Recommended Posts

Intercoolers or FMIC (frount mount intercooler) work by cooling the air that is heated by your turbo as it spins close to 100,000 rpm. Cooler air is more dense thus creates more power. The advantage in replacing the stock (piss small) intercooler is the reduction in intake temperatures allows for you to increase the boost using a bleed valve or electronic boost controller. This increases power however a FMIC is generally considered to be best left until a decent cat back exaust system and pod/panel filter has been added. Well thats my understanding on it all anyway. :)

No way this will be a waste of money.. the device is actually intended for cooling.. Any device, no matter where the application is, if something is gettin cooled, it benfits!!!

From where are you gettin that info from???

Do buy the front mount for sure!!!

hmm the front mount wont create lag at all.. If im wrong, someone correct me..

yeah definetly get the front mount.

My intercooler added a little bit of lag if i remember correctly.. im guessing they should because theres alot more piping for the air to go through ?? mighta just been me though ?

No way this will be a waste of money.. the device is actually intended for cooling.. Any device, no matter where the application is, if something is gettin cooled, it benfits!!!

From where are you gettin that info from???

Do buy the front mount for sure!!!

hmm the front mount wont create lag at all.. If im wrong, someone correct me..

No way this will be a waste of money.. the device is actually intended for cooling.. Any device, no matter where the application is, if something is gettin cooled, it benfits!!!

From where are you gettin that info from???

Do buy the front mount for sure!!!

hmm the front mount wont create lag at all.. If im wrong, someone correct me..

Misunderstanding there. Just saying if he did have exaust and Pod (which it turns out he has) a FMIC would be the next logical step. At no point did i say this is waste of money infact far from it. Espessially when coolers are getting so much cheaper.

http://www.skylinesaustralia.com/forums/in...showtopic=79523

:(

Misunderstanding there. Just saying if he did have exaust and Pod (which it turns out he has) a FMIC would be the next logical step. At no point did i say this is waste of money infact far from it. Espessially when coolers are getting so much cheaper.

uh?? im confused now.. i know u didnt say its a waste of money.. im tellin the guy who made the thread, that its not a waste of money.. i dunno im confused now..

ANyways my opinion is to buy it, as it will help!!

uh?? im confused now.. i know u didnt say its a waste of money.. im tellin the guy who made the thread, that its not a waste of money.. i dunno im confused now..

ANyways my opinion is to buy it, as it will help!!

I am the Guy who made the thread. Your help has been good. and yes I will buy a cooler.

thanx :D

Edited by woolls

Please recommend place where to get a good intercooler for a good price. I am also looking to do the same mods. (POD, Intercooler, 2 Stage Boost Controller & dump pipe)

wools - you found a place yet!! maybe we can get a discount if we get both our cars done from the same place.

I found a place but the guy wants to charge me 5Gs for all the above. 2G for intercooler, which I think is TOO MUCH??

Edited by harryg

An intercooler makes a decent upgrade but if you are afraid of increasing lag and spending loads of money you could go for a second hand R34 GT-t intercooler. It is a straight bolt on upgrade to the R33 gtst but flows about twice as much. You can pick them up on the forums very cheap too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...