Jump to content
SAU Community

Recommended Posts

OK just some update on the progress of emanage ultimate...

Got a call from Trent at Mercury Motorsport over the weekend, He say they finally got the car started with the unit installed, now they just need to do the tuning and hopefully they won't be too much drama in that department.

Trent told me it was pretty much the 1st emanage ultimate installation in QLD, not sure if he meant on GTT or all car, as they were trying to compare notes with other technicians.

Praying it will finally be done today of tomorrow. Oh btw, the Blitz SBC i-color is done.

What's with this thread???????????

I asked jas/slo32

Was that an AFM or MAP sensor driven Supra?

And I get no answer.

MacGuyver asked rd-runr

That's pretty good, was it on an auto or manual? If it was an auto, was it with the injector harness only? What other mods did you have at the time?

And he gets no answer.

I ask rd-runr

Is that fuel tuning only? Or ignition tuning as well?

And I get no answer

hoo@h has his car at Mercury Motorsport on the 26th August and they still have it. Now the guys at Mercury ain't inexperienced with Skylines and they couldn't get the EManage to work in 10 days of trying. For a product as expensive as EManage that seems a little excessive to me.

I don't think I will ever seriously look at an EManage as a solution for tuning on any of my cars.

:) cheers :(

What's with this thread???????????

hoo@h has his car at Mercury Motorsport on the 26th August and they still have it.  Now the guys at Mercury ain't inexperienced with Skylines and they couldn't get the EManage to work in 10 days of trying.  For a product as expensive as EManage that seems a little excessive to me.

I don't think I will ever seriously look at an EManage as a solution for tuning on any of my cars.

:P cheers  :)

well, they gave me a quato of one or two days to get it fitted and tune, but endup been almost two weeks now.

I guess because the Emanage ultimate now have all these new stuffs to work with auto, the wiring of fuel+ignition+ auto assist got complicated or something. I don't know, not a tech head myself.

Anyway, will have to see if the result is any better than say a blue Emanage.

Don't get your knickers in a knot princess, not everyone lives on the internet and tediously checks every thread they post in daily. :P

I have a shit load of mods sitting in my house still, need to get em all installed, should be a painfully expensive process.

so are you saying the installation manual is incorrect for the skyline(s)?

surely MM can follow wiring instructions?

Well, I actually print out the whole english manual for them, I guess either the wirediagram is bit hard to follow or they never read it. I don't know.

At least everything is hooked up now and the car starts, will Have to see what else can go wrong and hopefully getting my car back before this weekend.

Hey Nox, are you in Brisbane as well? Have you decided on which place to go to get your ultimate install? I guess MM will be the best place to go once they get my lab rat sorted. Coz by then, they will know how to wire up and what will go wrong.

I suppose it's too early to tell but has anyone heard of any problems with regards to Emanage Ultimates? I'm about to get an Emanage Blue back from Trust Japan after I returned it on warranty, apparantely the unit "wouldn't communicate with the stock ECU". Just wondering about my options incase the Emanage is a lost cause for me when it comes back (if it still doesn't work). Does anyone know if the injector harness for an Emanage Blue will work with an Emanage Ultimate (I still have the "Blue" harness installed in my car!) or maybe I should just get an SAFC II and cut my losses.

"Oh no it's the cops!"

"Worse, the police cops!"

Well, I actually print out the whole english manual for them, I guess either the wirediagram is bit hard to follow or they never read it. I don't know.

At least everything is hooked up now and the car starts, will Have to see what else can go wrong and hopefully getting my car back before this weekend.

Hey Nox, are you in Brisbane as well? Have you decided on which place to go to get your ultimate install? I guess MM will be the best place to go once they get my lab rat sorted. Coz by then, they will know how to wire up and what will go wrong.

Oh well...let us know how it performs.

The latest news from MM this morning, sad but true.

The final decision has been made, the guys at MM had tried their best and had contacted all the people they known but still can't get it to work.

Basically, when they connect up the whole unit to the ECU, the car runs rich at start and as the car warm up it start to run thin and then the engine will cut out, plus the auto assist goes funny, when they put the car into drive, it always start in 3rd gear not 1st. And please don’t comment on the technical ability of MM, unless you have successfully done the installation and tuning of the “Emanage Ultimate” on a R34 GTT automatic.

So unfortunately, we are calling it a quit today, there's no point of dragging it on without any more information. So on till there's more info available for the ultimate unit n GTT auto setup, then I shall bring my car back to the workshop.

Please let me know if anyone else has the unit and had it working with R34 GTT automatic in the future.

Good luck Nox, hope you can get yours to work, and please inform us if you do get yours working.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...