Jump to content
SAU Community

Recommended Posts

Head unit wont work in Australia...with radio at least, unless you get an FM expander, but then its a bitch becaue its like, 80.3 is nova and stations are expanded 10 or 20 Mhz depending which channel is free...confusing to say the least, but if you do your presets, it works out all good.

Yeah thats what l was planning on doing to start with. I don't listen to the radio that much, more to my iriver (with fm transmitter)....radio gets biggest work out when l go to the drive in with the gf.

We'll see how things go, l like the new JVC range......might go window shopping this weekend!! :( Esp after seeing how much needs to be done to get the dash pieces off.....if l've gotta take it all out, l might as well get a new head unit at the same time.

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Anyone put one of those cooler kits from just jap on their stagea??

if so how were the results, as in did the piping all match up fine for the stagea??

Don't know whether to get one, or just leave the stock cooler there coz of front bar & space behind it (as l don't really want to hack up the kit)

It should come with splits already, I used pioneers kevlar speakers and splits. They fit nicly and the splits are hidden where the original ones were on the sides near the front window.

Rear doors I used 6.75" 250W

EDIT: I got mine on ebay saved heaps. 6.25 or 6.75 like mine both will fit anyway. Small adjustments are no big deal with bigger speakers to get them to fit.

Edited by emanuelt
It should come with splits already, I used pioneers kevlar speakers and splits. They fit nicly and the splits are hidden where the original ones were on the sides near the front window.

Rear doors I used 6.75" 250W

The pioneer's the 6.25" one's???

I'm thinking about a set of Hertz HSK165's for the front, and ESK165's for the rear, just wanna make sure they fit first in the factory positions. Hiding the amp will be the biggest hurdle at this stage l think

Edited by NRGIZD

I went one step further and built a custom 2 x 10" sub box plus Amp in the boot. a bit dodgy using just a jigsaw, but i covered it in similar carpet to the wagon and it looks like a bought one. I had pics on here of it, but they've gone walkabouts, i'll get some new ones.

I didn't lose too much boot space, and it fits under the lugage cover, so no crims can spot it.

  • 2 weeks later...

Wierd question l know.....but

With no. plate mounting, which screw hole's do u use (ie: the outer one's, or the inner one's)

and do slimline plates at the back look alright???

and finally the car reach's brissy on monday, so only a couple of weeks (2-3 l'd guess) to go and l'll have it!! :blink::D

Worst thing is it won't be in time for the melb meet up :)

Edited by NRGIZD
  • 3 weeks later...

*rant*

Some theiving bastard on the ship stole my head unit & dvd player.

Got told today by ernie, did a good job too, no scratch's anywhere, so could tell they had the time to do it right (nice of them :D )

So now, l have to start looking for a head unit & dvd player by the looks of things. Glad they sent me the TV monitor & remote, least one part is there

*end rant*

Oh, but good thing is its being worked on now for compliance!! Yeah!!

Edited by NRGIZD

Man thats a right royal bitch. That'd suck...... can transit insurance cover that?

Im having 4 x 250w Pioneer 6inch speakers put into the doors this Friday, with my Clarion head unit installed. The amp will be installed underneath my drivers seat and the 6-stack CD player will be bolted under the front passengers seat.

The subwoofer box will be strapped down in the back, but set up for a quick and easy release and removal. I love my bass, so the sub becomes part of the car.

Fact is, the standard speakers are crap, and dont cut the mustard. Even on AM band with talking there is a heap of vibration etc. Nasty stuff.......

Not sure on insurance covering it....we're talking to them atm, not looking great though. Even if l get say 3-400 i'll be happy as that will get me a decent head unit.

Oh nice bout the speakers, l have some type-r splits & type-r coax's ready to go in, just working out what amp l'll go, as l'm not sure whether to put it under the passenger seat or in the boot.

oooooh.....and my custom plates were ordered on monday....:) :)

For your info, my complete install, with 4 new $130 speakers, installing head unit and facia panel, and bolting the 2 items under the 2 front seats, will be $650 to $700. Full days labour included.

Edit: $120 each, on special. The speakers are Pioneer TS-A1681S, 260w, 16cm diameter x 57mm mounting depth. 4-way with tweeter & 'Supertweeter'. :lol: Meant to be great with BASS

Edited by bwilkeson

Thats not a bad price. I think l might need a new facia plate if l find a dvd/cd player combo unit as opposed to going one of each.

I've got a few friends who are in that industry, so l'm only up for the cost of a slab, a couple of pizza's and a night in the garage helping out!! :)

NRGIZD, that sucks dude...

I will be posting up my rant about this same thing in a few weeks time...I'm pretty positive my screen will be taken :P Oh well not much we can do about that....

But on a positive note, we are getting my car moved to Osaka, where it will hopefully be gettin on a ship October 20th :P

Hey cool.....how did it look??? Damn l'm getting excited now....not long to go!!

Yeah don't hold your breathe bout your tv bro, according to my rep over there, it's happening more and more now, and it doesn't matter what liner it is on.

He (my rep) actually sent me via post my TV & remote, so at least l had that. Might be worth your while talking to your importer about getting stereo items taken out (or at least face plates) and sent to you via reg. mail.

NRGIZD, what dock's was yours at in Japan? :P

Just had a talk to the broker then and he said while they can get it taken out, it will be getting shipped through Kiwi Car Carriers, which means I automatically have shipping insurance...when the car arrives at Osaka, all items will be logged, when it arrives in Australia, if it is not in the same condition or does not meet the initial report from Japan, they will give me money :P

I'm assuming thats what you have aswell NRGIZD?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...