Jump to content
SAU Community

Recommended Posts

Has anyone got the ID tag numbers for the HKS GT2535 , 69mm compressor wheel is a little unusual but would help spool characteristics without giving away much flow capacity over 71.1mm GT35 wheels . Note it uses a T3 comp cover

instead of the Nissan style T04B cover found on the GT28R and HKS's GT-RS . Cheers A .

Nice result reflex, awesome result silva ! are you running std injectors also ?

I just picked up one these turbos new-in-HKS-box for USD$850, T25 flange. No biggie as I have a T3 .64 A/R HKS turbine housing thats a direct swap.

Looking forward to a similar result.

GT2535_won.bmp

  • 2 weeks later...
Has anyone got the ID tag numbers for the HKS GT2535 , 69mm compressor wheel is a little unusual but would help spool characteristics without giving away much flow capacity over 71.1mm GT35 wheels . Note it uses a T3 comp cover

instead of the Nissan style T04B cover found on the GT28R and HKS's GT-RS . Cheers  A .

ZI 6096J

GT2535-56T

446179-19

So HKS2535 is most efficient around 16-17Psi?

Will an internally stock RB25 be able to handle this ok?

Provided the tuning is good

I wouldnt expect the motor to last to long if you were at wot most of the time.

233rwkw @ 14psi sound like a good starter to me.

From what ive herd these turbos are a good turbo for drifting.Because of their mid range punch delivery. B)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
    • Have a chat with the tuner, you'd want to drive the car straight there.
×
×
  • Create New...