Jump to content
SAU Community

Recommended Posts

Talking of Ladas. I saw three of those damn things in the same model as yours over the weekend. I wasnt at a Lada convention, merely commuting.

One had the plate "SALADA" and was a nice light shade of brown with the dark brown stripe down, in a soft top although the hood looked in nice condition in black when down. The second was also brown but a hard top and looked a little tatty, that is quite near my work. There was an orange/red one on the back of a trailer. All were in and around Dandenong so maybe there is an importer in the area.

In Soviet Russia, Lada owns everyone!

Saff: Hehe - love that plate :)

Another ragtop though - cool! I've only ever seen 2. One had USSR as a plate. I wanted CCCP, but is gone :huh:

Shan: AutoVaz is one of the largest car-makers in the world. Since Glasnost - they have been involved with VAG in producing the new ones. The Niva was recently updated (1st time in 25 years) as a joint project with Chevrolet. The new one looks like the old Kia Sportage.

http://www.genser.ru/ru/special/chevrolet_niva/?frm=genser

Bec: Hehe - they're everywhere!

Adz sent me a pic of a white one yesterday too.

I was towing trailers on Sat.

Niva is rated to 600kg - we had one load weighing 1.9T - yay!

Denham: Yeah - it's a later version of that (shown is an 80s era one). Was sold in the UK as the Riva until about 1995 when it no-longer met emission standards. I belive they have re-tooled using VAG parts (aka Seat/Skoda etc) and are now making them available again.

Whatever the case - you're better off buying a 10-year-old Golf.

Bec: The TX5 was lightweight compared to the trailer. The other Lada towed a tandem trailer with Endless on it most of the way to Heathcote - until Benny went too fast and nearly destroyed them both... but that's another story :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...