Jump to content
SAU Community

Recommended Posts

yesterday had the car up on the hoist puttin on a new dump and front pipe, while it was up i was gona fix a hole in my mufler, i had 2 muflers, i was scratchin my head wondering why, it went turbo into cat then piping into mufler and some more piping into the arse end mufler.. do they have to have 2 muflers in japan.... and will 2 muflers be causeing power loss, if anyone can help be apresh

Link to comment
https://www.sau.com.au/forums/topic/85594-2-muflers/
Share on other sites

I have 2 mufflers aswell, the one in the middle and the arse-end cannon :D

I got a TRUST Power Extreme II system, I wanted to remove the center muffler recently but the exhaust shop guy said it wouldn't be advisable as I'd get cabin drone (one of my pet hates)

My advice - don't do it!

Link to comment
https://www.sau.com.au/forums/topic/85594-2-muflers/#findComment-1551612
Share on other sites

I have 2 mufflers aswell, the one in the middle and the arse-end cannon :P

I got a TRUST Power Extreme II system, I wanted to remove the center muffler recently but the exhaust shop guy said it wouldn't be advisable as I'd get cabin drone (one of my pet hates)

My advice - don't do it!

man, whats cabin drone, i am from high wycombe so things sometimes need to be explained

Link to comment
https://www.sau.com.au/forums/topic/85594-2-muflers/#findComment-1551752
Share on other sites

rofl..

basically just a constant 'droning' sound that can be heard inside the cabin.

hahaah ahhhh like the window down drumming noise, well i might have to get myself a new mufler then, anyone ripped their 1st mufler out, and do they get much "droning" so happy i have learnt something today.. def the smartest person in high wycombe by a mile now

Link to comment
https://www.sau.com.au/forums/topic/85594-2-muflers/#findComment-1551771
Share on other sites

yeh drone as is the most annoying noise known to man in the cabin

you can actually feel your testicles vibrate with the exhaust note

if you've only got a cannon-style muffler (read: not very efficient at muffling noise compared to others) then i'd keep the center muff in :(

Link to comment
https://www.sau.com.au/forums/topic/85594-2-muflers/#findComment-1553133
Share on other sites

Guys...2nd Muffler is also known as Resonator right? I went to Mettams yesterday and Pat fitted a "Hotdog" Resonator for me. Cuts down the droning by lots. Is there a difference between those "hotdog" style resonator and oval type resonator? Quite confused :(

Link to comment
https://www.sau.com.au/forums/topic/85594-2-muflers/#findComment-1553251
Share on other sites

Hello guys, just wanted to answer the Japan question from the first post.

No, they don't need to have 2 mufflers in Japan, but in order to get sufficient muffling capabilities from a 'cannon' style exhaust system, the 2nd muffler is needed obviously. Some of the 'cannon' style exhausts can be baught with just the single tail muffler, but they top 100db easy, whereas a legal exhaust system in Japan has to be <92db. It affects power loss so slightly that you won't notice/not worth the hassle.

Link to comment
https://www.sau.com.au/forums/topic/85594-2-muflers/#findComment-1554232
Share on other sites

Hello guys, just wanted to answer the Japan question from the first post.

No, they don't need to have 2 mufflers in Japan, but in order to get sufficient muffling capabilities from a 'cannon' style exhaust system, the 2nd muffler is needed obviously. Some of the 'cannon' style exhausts can be baught with just the single tail muffler, but they top 100db easy, whereas a legal exhaust system in Japan has to be <92db. It affects power loss so slightly that you won't notice/not worth the hassle.

cheers for nippin that in the but for us mate, i think ill have to take out my 2nd muffler as it has no bottom and holles all over it, might keep it though incase its to loud otherwise

Link to comment
https://www.sau.com.au/forums/topic/85594-2-muflers/#findComment-1554325
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...