Jump to content
SAU Community

R32 Wiring Schematics

Fitzpatrick Speed Works
 Share

Recommended Posts

Fitzpatrick Speed Works Mentor

Fitzpatrick Speed Works

Posted
Posted (edited)

Hi All,

Has anyone ever tracked down a wiring schematic for an r32 or even an r33 would be handy. I have a workshop manual and its rubbish, for example all the wires for the 4wd system are represented with one line that doesnt help me at all. I need something that is basically so detailed it has what every colour wire does and a whole diagram on all the seperate looms. With how many wires are in each. I think I am asking to much as Nissan cant help me and the workshop manual isnt going to help.

ANyone can you help and if you can it would be so appreciated, even if you get something in japanese I can get it translated.

Cheers,.

Daniel

Edited by Fitzpatrick Speed Works
Link to comment
https://www.sau.com.au/forums/topic/85741-r32-wiring-schematics/
Share on other sites
browny Proficient

browny

Posted
Posted
Mate I am in Canberra, unfortunately, interested though on this help front what were you thinking of?????

I have the R32 engine, body and rear looms diagrams in the form you are after ie schematic form with wire id's, colours, switch internals etc

I'm unfortunately missing the ecu loom, some of the door looms, AC loom plus some of the other little stuff like the Hicas/spoiler etc.

Fitzpatrick Speed Works Mentor

Fitzpatrick Speed Works

Posted
  • Author
Posted

The pin diagram wont help me cause I know what all the wires in the computer do more or less plus I am cutting all the ECU loom out of the car. Why I need to know is because I want to get rid of all the wiring except for the factory gauges, the brake and headlight switches and wires and the ATTESSA loom. I have pulled all the looms apart and there is some crossover wiring between the looms. I need all the wire IDs like what browny is talking about rather than the poor diagram that is in the workshop manual. Add to this when I got some panel beating done some wires where stripped by careless beaters, like I need diagrams dtailed enough to say brown wire with white strip in the ATTESSA loom is earth etc...

Troy or browny is anything you have email friendly??? If not email me your bank account details and I will put some monet in your account to cover photocopying and your time, and postage.

Thanks guys really appreciate.

Daniel...

Fitzpatrick Speed Works Mentor

Fitzpatrick Speed Works

Posted
  • Author
Posted

well, email me your account numbers etc, and I will pop in some money. Troy are you in Australia??? Are your a3 like browny's, if not it might be easier to use what you have I can put some money in your account for photocopying, your time etc.

Browny I can pay you for a3 photocopying if Troy cant help me out, and pay you for your time doing it, I dont mind who I get them off i just need them. Maybe if Browny supplies me what he has got and I can PM Troy for the rest of it or something. I dont mind.

Troy my fax line is 02 6255 0025, i dont care if its 100 pages if you can fax it through send it on. Just probable best to send one page that is complicated to see that it is all transmitting good and I can make everything out.

Thanks guys really appreciate your help.

Fitzpatrick Speed Works Mentor

Fitzpatrick Speed Works

Posted
  • Author
Posted

Thanks to both Troy and Browny, both legends....

Troy the ignotion fuse box out put diagram is going to be a huge help, and browny the 4wd loom schematic is awesome. Over time I am going to re draw my own diagrams ones that are super easy to understand and are layed out as the are in the vehicle. Thanks again to both of you guys I really appreciate the effort.

Cheers,

Daniel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...