Z32 Wiring On R33?

[mass_iv]

ok guys ive searched for this but come up with nothing...

my question is:

i just bought a z32 afm, and need to know how to wire it up on an r33. anyone know how to do this as in what wires match up to the r33 wires and so on, also i dont know if it makes a differrence but i have a power fc....

Any help on this topic would be kindly appreciated

cheers

Mass

Edited September 1, 2005 by mass_iv

[mass_iv]

come on guys some one must know how to wire up a z32 to an r33, heaps of u guys have them installed.....

[Robo's]

I installed one on my R33, im sure i got the wiring diagram from here somewhere. Continue to search and i'll check my files when i get home. Wasnt too hard if i remember.

[mass_iv]

thanks robo's i need all the help i can get... cheers diagram would be nice

[predator]

you didn't look very hard.. as its right here right near the top..

http://www.skylinesaustralia.com/forums/in...php?act=SF&f=57

[mass_iv]

thanks for that i cant believe i missed it

[mass_iv]

ok after reading this just another question does anyone know how different a series 2 r33 is to a series 1 in terms of afm wiring? coz that tutorial is for r32 and r33 series 1....

[Trust33]

Yep,this has been done by myself and cubes a while back.

how to conect z32 to r33 gtst s2 (3 pins)

This link tells you what to do.

[mass_iv]

thanks trust33 so its as follows:

i've done some testing myself also and found the following:

1. Power 12V connecting to pin 49

2. Air Signal ground to pin 26 (note it's not ground)

3. Air signal to pin 27.

So to wire the z32 to s2 afm as follows:-

Z32 AFM R33 S2

A - not connected

B - Air signal -> 3

C - Ground -> to ground

D - Grd signal -> 2

E - Power 12V -> 1

F - Not connected