black sky Posted September 5, 2005 Share Posted September 5, 2005 (edited) Hi All I just purchased a gt 30bb turbo off a friend Unfortunately he was pretty useless in giving me specs of the turbo!!! I want to put the thing on an rb20 and was wondering what kind of lag I would get from the turbo? Also does any one know the exact specs of the turbo?? such as a/r ratios and compressor and turbine sizes, and what hp there rated at. Done the search came up with nothing. The part number is Part # 705329-0002 Any help would be great Cheers anthony Edited September 5, 2005 by black sky Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/ Share on other sites More sharing options...
TTT Posted September 5, 2005 Share Posted September 5, 2005 Can't really answer your questions on specs, however I can tell you that any GT30BB turbo will be laggy on an RB20. there is a thread somewhere on how these turbo's are on the rb25 which is larger in capacity and compression.. DISCOPOTATO03 on these forums will be able to tell you what the specs are with that number Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1563668 Share on other sites More sharing options...
mass_iv Posted September 5, 2005 Share Posted September 5, 2005 yeh i agree i was told mine would be a little laggy and ive got it on an rb25... but i guess i will find out soon, i get my car back this sunday. Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1564763 Share on other sites More sharing options...
R31Nismoid Posted September 5, 2005 Share Posted September 5, 2005 RB20 - dont even bother IMO get soemthing smaller GT28 Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1564897 Share on other sites More sharing options...
jaik Posted September 5, 2005 Share Posted September 5, 2005 Its actually a GT2860... so might not be so bad for a 20. http://www.turbobygarrett.com/turbobygarre...60_705329_2.htm JK Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1564945 Share on other sites More sharing options...
boostn32 Posted September 5, 2005 Share Posted September 5, 2005 if it was a GT30 i would of brought it off u Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1565366 Share on other sites More sharing options...
wheels_24 Posted September 5, 2005 Share Posted September 5, 2005 Hey black sky I have a GT30 on my RB20 reason being i got it for free so why not put it on. I like it the lag doesn't bother me that must in one way it is good because it is safer in the wet cause it doesn't want to boost every time you take off. My car hits full boost at about 4000rpm to 7200rpm it is quiet a big rush to i might add. it is also good because for just normal driving i can just cruise around with out it want to step out under boost all the time if you have your foot down, if you want to get into it i just boost up first and once you are out of first gear and change it will boost all the way through you gears if you keep your foot into it. It is all good and well to say get something smaller put if you got this at the right price why not put it on just mean you will start boost at 4000 instead of 3200 - 3500 with a smaller turbo. sorry i cant help you with the spec's as the guy that gave me mine didn't say much about it just that it was only 2000km old he did say that it was good for at least 500bhp. So put it on and good luck with it Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1565917 Share on other sites More sharing options...
TTT Posted September 5, 2005 Share Posted September 5, 2005 wheels 24 - lets say you're driving along in the wet and come to a street that you need to turn left in to and it is a steep hill. a rwd rb20 powered car with no boost in the wet.. how you going to get up that hill at anything above datsun 120y speeds? what do the rb20's have? 8.5:1 compression? with no boost, in 2nd gear (I'd assume) how can you possibly have te car moving? it would feel crap to drive around like that. full bost at 4000rpm... what exactly is full boost? what psi or some other form of pressure measurement is your car tuned for? and around 2500-3000rpm, do you see any sort of positive pressure? or do you always have to shift back to first gear for situations like I've described above? Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1565931 Share on other sites More sharing options...
black sky Posted September 6, 2005 Author Share Posted September 6, 2005 Thanks guys yea i got the turbo pretty cheap so i thought why not wack it in. at the moment i've got a t3/t4E in there and it's makin full boost at about 4600 so 4000 would be like a dream come true. I've got this in a 180sx so the car's light as all F#$k and she goes good with the T3/T4 turbo in it but i just wanna make some easy power without pushin to much psi through the engine hence the big turbo. at the moment i'm gettin 204kw@ the wheels in 4th gear and but my coil packs are fowling and the turbo's isnt flowing air properly by the way that's bein made on 15psi. well if any one else has any more oppinions post up. Thanks for your first hand knowledge wheels_24 Cheers anthony Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1566150 Share on other sites More sharing options...
wheels_24 Posted September 6, 2005 Share Posted September 6, 2005 (edited) well i do see some increase in power just after 2500 it isn't that bad that i have to drop down to first it still has pretty good pick up when i mean by full boost when i hit about 4000 that is really were it wants to take off and throws you back in your seat i was running 16psi but it seems that i didn't have a very good engine since that i have just had the engine pulled down for a rebuild. But i have taken my car up around olinda and the hills past ferntree gully and it was fine to drive not a problem. Even though the RB20 is a smaller engine they still have a little bit of pick up my mods a as follows: bosch 040 GT30BB bigger injectors fuel reg wolf 3D 3" turbo back FMIC POD 45mm waste gate Once i have done my rebuild i have been told should be able to get up to 240rwkw maybe with a good tune well thats what chasers think as i should be able to run a little more boost after it is run in as it is a fresh engine and i am putting aries forgies in Edited September 6, 2005 by wheels_24 Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1568226 Share on other sites More sharing options...
Ryosuke Takahashi Posted September 12, 2005 Share Posted September 12, 2005 how anyone put this on an RB26? these are external gate turbos? is a gt 30/40 or 35/40 bigger then the gt 30? Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1578031 Share on other sites More sharing options...
R31Nismoid Posted September 13, 2005 Share Posted September 13, 2005 full boost when i hit about 4000 that is really were it wants to take off and throws you back in your seat i was running 16psi Once i have done my rebuild i have been told should be able to get up to 240rwkw maybe with a good tune So your making less than 240rwkw now on 16psi out of a GT30 ? Geebus. You could make more power with better response from a GT28 of equalently sized turbo. with a typical GT30 you should be aiming for 280rwkw at a minimum. As for the GT30, what spec is it? thats gonna make a lot of difference When you say 16psi @ 4000rpm, is that under full load from 2000rpm in 4th on a dyno? Or realistic stuff on the street? I'll be betting 1st/2nd your well above 5000rpm before making any moderate boost Actually, further more... do you have a dyno graph to post up? Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1581377 Share on other sites More sharing options...
wheels_24 Posted September 13, 2005 Share Posted September 13, 2005 thats when i am driving around on street every day driving i think the reason why i wasn't heaps of power was because of my engine was not in good shape it apears as it is getting a complete rebuild, another reason was because i didn't have a after market fuel pump. I have now bought a bosch 040 pump and once i have got my car back and run the engine in i am hoping to see a good improvement hopfully i do have a graph but no scanner Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1582024 Share on other sites More sharing options...
R31Nismoid Posted September 13, 2005 Share Posted September 13, 2005 it would be different from 3rd to 4th etc. In 2nd its making 16psi @ 4000rpm and the same in 4th. There is no way it would be the same Post the graphs etc is a good place to start to get a more accurate idea of whats going on... Spec of the turbo also Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1582155 Share on other sites More sharing options...
wheels_24 Posted September 13, 2005 Share Posted September 13, 2005 i don't have a scanner sorry so i cant post up the graph, and for the spec's i don't know them either sorry because the guy that gave it to me didn't tell me what they were and it didn't really bother me that much cause he showed me the receipt him buying it 2 months before giving it to me. you are right there is a difference between 2nd and 4th and the fact that i don't really come on boost in 4th as i only drive this on the road so unless i take it out to say 140 - 150 in 4th it want really hit boost so i cant really say what boost it gets to in 4th. when i get my engine rebuilt and run it up again i will see if i can get my little sister to put it on for me a school for you Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1582469 Share on other sites More sharing options...
carl h Posted September 13, 2005 Share Posted September 13, 2005 heh, 240rwkw is kinda sad at 16psi as i put down 288rwkw on 17psi with a gt30r. my setup is laggy but its due to poor tuning, once i have a go at the tuning it should be spooled by 4k easy. Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1582474 Share on other sites More sharing options...
wheels_24 Posted September 14, 2005 Share Posted September 14, 2005 is you GT30 on a RB20 or RB25 Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1583245 Share on other sites More sharing options...
R31Nismoid Posted September 14, 2005 Share Posted September 14, 2005 heh, 240rwkw is kinda sad at 16psi as i put down 288rwkw on 17psi with a gt30r. Not neccasarily. As i said, depends on what spec the turbo is in Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1583728 Share on other sites More sharing options...
carl h Posted September 14, 2005 Share Posted September 14, 2005 is you GT30 on a RB20 or RB25 <{POST_SNAPBACK}> ive got a gt30r on a rb20 with a .63ar turbine. engine also has 'low' compression (140 across the board). right now it runs tooo freeking lean under spool so it takes forever to spool up but once it does it hits like a sledge hammer and you are off. Link to comment https://www.sau.com.au/forums/topic/86508-gt30bb/#findComment-1584622 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now