Jump to content
SAU Community

Recommended Posts

Ive got to go overseas for work in the next few weeks several times, and was wondering if anyone could tell me a safe period of time i can leave the car without haveing to get someone to start it and/or drive it?

I will disconnect the battery, but was just a little concerned about seels or gaskets drying out / seizeing.

So does anyone have an opinion on how long they would leave a car sitting in the garage without turning it over, or am i being a little cautious.

Cheers fellas.

Not that it will make a difference, but the car is a R32 GTR and the time frames im looking at range from 2-3 weeks to 3-4 months.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/86702-how-long-to-leave-car-sitting/
Share on other sites

don't worry about it, your car probably spent 3 months without being started before it got to Aus. The battery would be the only real issue.

Just give it some new oil when you get back and off you go :D

just watch for those gremlins.... i had my car off the road for 3 months .. and she was having issues with stalling.. took the car off the road for 4 months and then it wouldn't idle ever again...

just about to get it back on the road again after 9 months .. hope it doesn't get any worse.......

normally it shouldn't be a n issue.. mine just freaked out on me LOL

I would add some obvious things. Don't have a full tank of fuel because it will eventually 'go off' so try and have as little as possible (but not completely empty = bad for fuel pump).

Do as Duncan suggested and replace the engine oil at the very least. I would probably change the oil filter and fuel filter too.

When you come to starting it again. don't try and crank it very first go: let it build some fuel/oil pressure. Its good if you can get someone to turn it over every couple of weeks but I really wouldn't worry too much.

I had my car off the road for 2 weeks, it was little hard to start cause of the battery (cranked longer than usual had to try twice), it also had a bad missfire for the first minute or so but i just let it idle for a while and it was back to normal. I guess it would have been cause of the fuel needed to build up pressure through the lines.But yeah, do disconnect your batt before you go, change the oil and fuel and CHECK YOUR TYRE PRESSURES when you do come back!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...