Jump to content
SAU Community

Recommended Posts

Hey Guys,

My car has been at the exhaust shop for the last 7 days getting the following exhaust system bolted onto my stock GTR:

- 3" Stainless Steel Dumps

- 3" Fabricated Front Pipes

- 3" Mandrel Bent Piping

- 3" Hi-Flo Cat

- 3" Muffler

This is an upgrade from the stock exhaust system which was shagged.

I went for a 3" System because I believed that the low down torque and response would be better than a larger 3.5" sized system. The guys spent a lot of time doing it and there was a few minor setbacks (rusty old exhaust system was hard to get off the turbos etc)

The car sounded pretty good of course, so I jumped in it and the first thing I noticed was the complete lack of power. The thing feels as though its bogging down under full throttle, sure it has an underwhelming amount of life in the 4,000 - 7,000rpm top end, but anything under that and it is hopeless!

The popping is a lot louder and it just seems to be trying a lot harder for bugger all difference in performance.

Can anyone offer some light on my situation?

Link to comment
https://www.sau.com.au/forums/topic/87616-new-3-exhaust-system-no-power/
Share on other sites

Thanks for the suggestions guys, I reset my ECU (unplugged the battery and stabbed the brake pedal several times, then reconnect it) .. mild improvement but still just as powerful as the car was before the exhaust.

The exhaust fitter said he had to slightly customise the dumps to accomodate the o2 sensor.. maybe its that. I'm dropping it back in tomorrow morning.

out of interest what do the custom dumps look like? is there a particular reason you went custom over the available off the shelf dumps? is it possible the new cat is causing a restriction? what type of cat is it?

also have you had the car dyno'd before? if so dyno it now and see what happens.

Also, just out of interest how much was the exhaust? and mild or stainless?

They where off the shelf dumps, and other than the muffler the rest was custom.

Dyno, no, I havent yet. I already can feel a problem with the car, i'd rather take it in when its healthy! which i will do once this problem is sorted.

All up it cost $1700 at mates rates.

Pentae - I have the same sort of modification to my exhaust system except I have 3.5inch back from the cat, but I don't have any aftermarket dumps. I am running 14psi boost and this gave me an extra 60KW at the rears assuming standard is around 170KW. So you should be feeling a big difference! As for below 4000rpm didn't have the chance to drive the standard exhaust system, but mine is pretty sluggish too until i hit boost at about 3500rpm.

yeah, 3.5inch would have been better than 3inch. a smaller exaust will only rob you of performance, it won't give you any advantage in throttle respose or low-down torque.

In N/A's maybe, as backpressure is required, however in turbo's the turbo creates ample backpressure

If you are experiencing lack of power. TAKE IT BACK and tell the guy who installed it all. As they haven't done their job properly if this "upgrade" is giving you poorer performance.

  • 4 weeks later...

i had twin apexi air filters and SS dump pipes and 3in turbo back exhaust fitted to mine

HUGE difference

stock ecu and all that, the with exhaust and intake mods stock boost jumped to 14 psi

and can feel boost about 2700rpm full boost by just before 3500rpm

also i havent dynoed but will have just over 200awkws

so somethings wrong in urs

good luck

RellikZephyr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...