Jump to content
SAU Community

Recommended Posts

nah i had a think about it today, and this is what i came up with

say im selling the car for $XXXX, and he agreed to take it as is for that price. now we all know what he is happy with doesnt mean vic roads is happy with etc...so it either has to be sold with a RWC, or de-reg'd and sold without rego etc

now, i can say to him, i'll knock $XXX off the price we agreed on, and ill cancel the reg, and you take it like that

OR

I'll let you take it as is, but if you dont show me a RWC, within 14 days, ill cancel the registration (as its legally my car) and ill get my rego refund etc, + ill have the full price we agreed upon in the first place

so that way i let him decide how he wants to go about it...if he is happy to do the RWC within 2 weeks, thats fine with me, but after 2 weeks ill cancel the reg if i dont see a RWC :P

thanks for the advice everyone

I'll let you take it as is, but if you dont show me a RWC, within 14 days, ill cancel the registration (as its legally my car) and ill get my rego refund etc, + ill have the full price we agreed upon in the first place

That isn't the way it works.

Once the car is sold, it's legally the property of the person who has purchased it.

You can't just sell a car and then decide 2 weeks later "oh, I want my stereo back now, I think I'll just go take it..i have a reciept for it, so it's mine and i can take it if i want" :D

If you sell the car with plates and without roadworthy certificate, you are breaking the law.

This has been explained in depth several times, and although you SAY you understand, it's quite apparent that you just don't get it.

So........ if after 14 days the buyer hasn't shown you a roadworthy certificate, exactly how do you plan on getting the plates back?

So........ if after 14 days the buyer hasn't shown you a roadworthy certificate, exactly how do you plan on getting the plates back?

1 x Screwdriver

1 x Balaclava

1 x Pair of Shoes - Running Style

:D

do u understand that the car is still in my name. therefore, the registration is still mine to cancel....

and as for this breaking the law shit....who cares. if the buyer agreed to take it that way without a RWC, then they are breaking the law as well

So.... you want to sell the car, but still retain ownership of it?

Your theory of "they're breaking the law as well" won't hold up in court, as the owner, the onus is on YOU to do the right thing.

The paperwork is in your name, and you are the one who will be held responsible for anything that may happen.

It is quite legal for a buyer to take ownership of a car without RWC, but it's not legal for you to sell it with plates if you don't supply rwc.

There isn't much point in asking for advice on the right way to do things, if you're just going to make it up as you go along.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...