Jump to content
SAU Community

Recommended Posts

Nah its got worse since then Joe - wanna feel it now - its absolutely awful. They havent been able to get the wheels off to have a look - they rung me with wheres your lock nut and im like in the cab somewhere have a look and they're nah nah cant do that - geez what do they think i keep in there, i mean my mum occasionally drives it so its not like ive got stuff in my car i dont want to share - anyway a day later found my lock nut sitting on the back seat the dickheads shouldve looked they wouldnt have to look far!!

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

moral of the story is that i dont know what suspension is on it and its unclear what has to be done but apparently the rubber stoppie thingys have gone and new front shocks are also needed suspectedly. I had the bushes replaced not that long ago so they wont need to be done.

steak for dinner - been so long since ive had red meat!! just kinda sits in my stomach and feels yukky so i dont eat it - in fact these days i really dont eat dinner i just stop feeling hungry after 4. I have a weird body in one day i can just guts myself and eat n eat n eat and the next day i eat the tinest thing and feel sick. Its got so bad that in year 10 i didnt eat for about 2 weeks i was soo weak couldnt get out of bed - my parents thought i had an eating disorder and it was dilberate but it wasnt its just i couldnt eat - i was talking to a girl about 2 years later and she had the same thing but she actually went to hospital for it.

hahaha wanna hear something people seem to think is gross?

I can eat a whole tin of anchovies by themselves for a snack hehe i think they are yummy.

I was just thinking about caesar salad - and it brought my mind onto anchovies.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
×
×
  • Create New...