Jump to content
SAU Community

Recommended Posts

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

The Pig Drawing Personality Test

The best part about this is that you can forward it round your office and then laugh at everyones crap drawings. We are thinking about setting up a small pig art gallery in the corner of the office here.

Don't cheat by reading the whole thing first. It is hysterical if you do it right!

Get a blank piece of paper , draw a picture of a whole pig on it, not just the head , just a basic drawing though , don't spend too long on it .

DRAW THE PIG BEFORE YOU GO ON.

IF YOU DON'T THE TEST WILL NOT WORK!!

NO CHEATING,

DRAW THE PIG FIRST

HAVE YOU DONE THE DRAWING??

IF NOT, DO IT NOW

IT IS REALLY FUNNY IF YOU DO IT RIGHT!

OK' NOW TO THE INTERESTING STUFF.........

The pig serves as a useful test of the personality traits

of the drawer.

· If the pig is drawn to the top of the paper , you are positive and optimistic.

Toward the middle , you are realistic.

Toward the bottom, you are pessimistic , and have a tendency to behave negatively .

· Facing left, you believe in tradition, are friendly, and remember dates(birthdays, etc.)

Facing right , you are innovative and active , but don't have a strong sense of family , nor do you always remember dates .

Facing front (looking at you ), you are direct, enjoy playing devil's advocate and neither fear nor avoid discussions .

· With lots of details , you are analytical, cautious , and distrustful.

With few details, you are emotional and naive , you care little for details and are a risk taker .

· With less than 4 legs showing , you are insecure or are living through a period of major change .

With 4 legs showing , you are secure, stubborn, and stick to your ideals

If you have drawn more than 4 legs , you are stupid .

· The size of the ears indicates how good a listener you are. The bigger the better.

· The length of the tail indicates the quality of your sex life, and once again the longer ,the better.

Ok, who didn't draw a tail?

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...