Jump to content
SAU Community

Recommended Posts

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

paul - yea well hopefully we can hassle bambam some and get a line of trade going.. :( and what do you mean soon i'll be a rice boy? i've always been a rice boy!! but i'm one who can't handle excels and lancers.. :P

rob - i cleaned out my intercooler today with a degreaser bath (helps that dad has a decked out workshop) and you should have seen the amount of oil/crap that came out!! took 5 washes to get it clean!

paul - hopefully the stock cooler will keep me going on cold nights at 0.9 bar.. :)

uk? how long for?

new oil makes the car drive better? man - how long was the old oil in there for?!?! what did u use? i used castrol R and found it to be good.. am trying mobil 1 but don't think it's as good.. next time will be back to castrol r me thinks..

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Photo quality is terrible, but there's a few things on that board that give me suspicions it has some issues. Add to that, I'm hoping the cut and exposed wires under the dash were not exposed or touching each other before you pulled that all apart.
    • Stories like this are why the immobilizer installs I've done are 100% reversible. No harness cuts.
    • update; Replaced oem starter motor with a Jaylec 70-61111 car still didn't start, moved over to the alarm system unraveled the spaghetti checked the solder end points, PCB board burn smell, wiring ends, capacitors, water damage everything looked fine restarted car vroom. restarted 5 to 6 time over an hour started put every thing back together only to not have it start any more. looks like i will be removing the alarm system next weekend.      
    • Lots of people. Could be a lot of things like people have said. Either the heater hose/pipe, the turbo coolant return that wraps around the back of the engine, or a core plug. I have seen all three. If you want me to guess wildly though I would bet it's one of those hoses for the turbo coolant return. Or the brazing/welding for the Y- section has failed. Get a borescope down there to be 100% sure.
    • FWIW, I've aerated oil, and cams snapped. You can figure out the rest 🥲
×
×
  • Create New...