Jump to content
SAU Community

Recommended Posts

What about shipped to erskine park near penrith?

Or is it not far for there...

Did doodz come and pick it up? If yes i will ask him

The same freight charge will apply

Kirrawee is a long way from Penrith

Cheers,

Steve

  • 2 weeks later...
  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

  • 1 month later...

Sure is mate, you can purchase online via our website by following the link below:

http://www.justjap.com/forumcoolerkitspecial.htm

Regards,

Steve

Hey Steve

i dont know if u can tell me this but ive bought and r31 passage with rb20det in it and im wondering would the r32 fmic kit fit correctly?

Hi Just Jap

i just wanted to know if the pipping for the r34 gtt is avliable, also wanted to know if the pipping follows the same way as the stock cooler??

or will it run on two different ends just like the sr20's

does anyone have any input about these coolers and pipping???

does it create any lagg, is the pipping 3 inch..

Edited by ZERO
  • 5 weeks later...

Another shipment of our famous intercooler kits has now arrived and we are now delighted to bring SAU members even better pricing on these complete intercooler kits!

Get in quick and pick up your Type 1 intercooler kit for only $499!

Order online now at http://www.justjap.com/forumcoolerkitspecial.htm

Cheers,

Steve

Just Jap

HI,

Nice kits you have there man. Just a quick question, for your type 1 kit for R33 Gtst and R34 GTT, are they the exact same....can you cross fit them?...if you fit the r33 GTST kit to a R34Gtt, will the piping touch the radiator fan?....hopefully u can help me here...thanks man

Hi 32Line: You are very much correct, the R33 kit and the R34 kit are the same.

Most kits tend to require some minor fan blade trimming, though this does vary from car to car.

Cheers,

Steve

Hi Just Jap.

SAME QUESTION AS ABOVE.

i just wanted to know if the pipping for the r34 gtt is avliable, also wanted to know if the pipping follows the same way as the stock cooler?? ( I have come across a Blitz type cooler kit that does this)

or will it run on two different ends just like the sr20's

Hi Just Jap.

SAME QUESTION AS ABOVE.

i just wanted to know if the pipping for the r34 gtt is avliable, also wanted to know if the pipping follows the same way as the stock cooler?? ( I have come across a Blitz type cooler kit that does this)

or will it run on two different ends just like the sr20's

Hi Mike, I have replied to your pm.

The piping runs similar to the picture below, which shows one of our intercooler kits on an R32 GTS-T

32gtstcoolerfitted1.jpg

32gtstcoolerfitted3.jpg

some questions

- are the outlets and piping 3"?

- is the piping aluminium or steel

Hi mate, thanks for your enquiry.

The piping is alloy, and the piping is 2.5 inch

The coolers included with the kits normally use 2.5 inch outlets to suit the included pipework.

Cheers,

Steve

How much for the Type 2 Intercooler Kit to suit R32 GTS-T with delivery to Mildura, Victoria 3500?

Also, what's involved in terms of installation? I know it's not a simple bolt-on item, as the front bar needs to be cut into and I've even heard that the battery needs to be relocated.

I've got a huge battery, so I won't be able to turn it or anything to allow the intercooler pipe to go through.

Might have to get a SMIC... see how I go.

Thanks,

Adrian.

How much for the Type 2 Intercooler Kit to suit R32 GTS-T with delivery to Mildura, Victoria 3500?

Also, what's involved in terms of installation? I know it's not a simple bolt-on item, as the front bar needs to be cut into and I've even heard that the battery needs to be relocated.

I've got a huge battery, so I won't be able to turn it or anything to allow the intercooler pipe to go through.

Might have to get a SMIC... see how I go.

Thanks,

Adrian.

Hi Adrian, the piping that crosses over the front of the engine runs through the drivers side guard below the battery, so you should be able to retain your current battery.

Installation is more time consuming than difficult - A competant workshop can handle this side of things for you if you arent game to take the task on yourself.

We can have a Type 2 kit to you for $590 delivered.

Cheers,

Steve




  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...