Jump to content
SAU Community

Idle

R33_Series2Lover

By R33_Series2Lover,
in Engines & Forced Induction

 Share

Recommended Posts

R33_Series2Lover Collaborator

R33_Series2Lover

Posted
Posted

Ive done a search and have read tonnes and tonnes of stuff but nothing descibes what I have. The thing is I drive the car goes well everything fine sometimes car idles at 650 sometimes 700 sometimes 800 the thing that is wierd is that at the lights on occasion idle goes to like 1100 and just stays there for a whole drive to next lights again 1100 i turn the steering wheel wait a few seconds and idle goes back under 1000rpm. I have read the skyline idle is a common thing but is it common that idle runs smooth but at different rpms. Would ECU reset do anything in helping the car pic a idle rpm and sticking to it. I check the TPS switch its all good. just strange thats all

Link to comment
https://www.sau.com.au/forums/topic/89473-idle/
Share on other sites
R33_Series2Lover Collaborator

R33_Series2Lover

Posted
  • Author
Posted

AAC valve?? tried to run a search on what this is and where it is located all I could find is that if i clean it with contact cleaner along with my AFM and make sure spark plugs are good idle should be sweet. So what is the aac valve and where is it located on a R33 RB25DET engine.

Link to comment
https://www.sau.com.au/forums/topic/89473-idle/#findComment-1615672
Share on other sites
R33_Series2Lover Collaborator

R33_Series2Lover

Posted
  • Author
Posted

Anyone have pics?? So all i do is remove plug spray contact cleaner then attach?? Resetting ecu is safe right?? I know you disconnect battery then turn on the lights till battery drained and stuff and keep steering wheel straight so hicas doesnt stuff up then reconnect then go for a long drive anything else i should be doing??

Link to comment
https://www.sau.com.au/forums/topic/89473-idle/#findComment-1615681
Share on other sites
R33_Series2Lover Collaborator

R33_Series2Lover

Posted
  • Author
Posted (edited)

sweet neo in a 32 sorry i find that pretty cool. Yeh well with mine its not that bad though its kinda tempermental my idle it has a mind of its own. when its at idle its firm and doesnt move but is not always the same idle. Sometime its between 650 and 800. On occasion it goes to 1000rpm but I rev it or turn the steering wheel and it come back down. its more of an annoyance than anything else. Wouldnt mind my car idling at one exact spot all the time but ive taken it to nissan,mechanic and they cant fault my idle so next year im going to do some mods and get a safcII get it all tuned by a pro it should be ok then.

Edited by R33_Series2Lover
Link to comment
https://www.sau.com.au/forums/topic/89473-idle/#findComment-1616884
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      r34 Skyline 25 Gt four GTR conversion (ENR34)

      By MBS206 · Posted

      There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
    • Predator1
      Ogura orc1000f vs Osg tr2cd vs Osg r3c experiences, max torque/max hp?

      By Predator1 · Posted

      Haha I do that.. thats when it chirps..The bit point for me is almost non-existent. Otherwise I stall it. But yes, in terms of performance, the clutch is solid af.
    • GTSBoy
      r34 Skyline 25 Gt four GTR conversion (ENR34)

      By GTSBoy · Posted

      Greg speaks wisdom. These dirty old Datsuns are only value when they are cheap. When they are not cheap, there is no value. Sounds contradictory, but it's true. We are now 20 years past the hey day of modifying cheap 90s JDM cars for small amounts of money. This is a different world. If you are rich and can afford not to care about what is effectively wasting money on an old Datto shitter, then I have no reason to argue against it. But if you are wanting to experience what we all experienced back in 2005 (and I bought my car last century!) then there is no way to do it.
    • Kinkstaah
      r34 Skyline 25 Gt four GTR conversion (ENR34)

      By Kinkstaah · Posted

      Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
    • AdiR34
      r34 Skyline 25 Gt four GTR conversion (ENR34)

      By AdiR34 · Posted

      Reading all this... hurts lol. I have an ENR34 5MT and I paid an inflated USA price for the car alone, had to do tons of preventative maintenance past that, and so I'm over $30K USD into the car already and haven't even touched power.  I wanted to +t it. Not even trying to make GTR numbers, I'd be happy with 250hp.  Can I get away with paying much less to make that happen?
×
×
  • Create New...