Jump to content
SAU Community

Recommended Posts

I'm hoping to buy an import sports car soon and am basically considering either a Skyline or a 300ZX TT. Has anyone in here ever owned both cars ? If so, how would you rate them in terms of performace and reliability ? Are there any particular bad points/things to watch out for in either of these beasts ?

Cheers,

EXIT :confused:

Link to comment
https://www.sau.com.au/forums/topic/8978-skyline-vs-300zx/
Share on other sites

The 300ZX is a nice car ..... but weighs in at around 1500-1600kg

Silver-Arrowz is right, most articles on modified 300zxs stress how tight the working area is in the engine bay. (either a pain in the arse if you are doing it your self or more expensive in labour)

The R32-R33 skylines weigh around 1200-1300kg and I reckon look better (not as dated) and there is a lot more performance parts in Australia for them.

:alcoholic

Link to comment
https://www.sau.com.au/forums/topic/8978-skyline-vs-300zx/#findComment-133022
Share on other sites

I own an R33 Skyline and my best mate owns a 300ZX TT. In a drag i beat him (but i've got a bigger turbo, but only run 0.8bar when racing him, makes it more fair). The 300ZX gets off the line quite quickly with the extra 0.5lt and smaller turbos. But once mine winds up i reel him in. Also the fact that i haven't learned how to launch my new twin plate clutch, and that i need the car tuned badly!

Both nice cars, but i think i like the skyline better

Andrew

Link to comment
https://www.sau.com.au/forums/topic/8978-skyline-vs-300zx/#findComment-133194
Share on other sites

You are of course going to get a biased opinion due to this being a Skyline forum, however I was very close to buying a 300zx but was warned against it because of there unreliability, high insurance costs (being a twin turbo), high maintenance costs and the lack of people who will look at them when something goes wrong.

Get yourself a nice Skyline. You won't regret it. :P

Link to comment
https://www.sau.com.au/forums/topic/8978-skyline-vs-300zx/#findComment-133285
Share on other sites

Originally posted by 2fardown

You are of course going to get a biased opinion due to this being a Skyline forum, however I was very close to buying a 300zx but was warned against it because of there unreliability, high insurance costs (being a twin turbo), high maintenance costs and the lack of people who will look at them when something goes wrong.  

Get yourself a nice Skyline.  You won't regret it. :P

My words exactly down to a T! I like the shape of the 300zx however you can make the skyline look verrrrrrry sexy with a couple of body mods!!

Link to comment
https://www.sau.com.au/forums/topic/8978-skyline-vs-300zx/#findComment-133297
Share on other sites

I read in HPI (issue 23 i think) that 300zx's were really high maintenance and the VG30 engines were softer and could break easier under hard use. Aparently they were the worst performance engines Nissan ever produced. Go the Skyline if you want to deal with modding later on.

Link to comment
https://www.sau.com.au/forums/topic/8978-skyline-vs-300zx/#findComment-133331
Share on other sites

Originally posted by fatz

if you geta 300 get an auto one they go harder than the manuals

pete

I don't know about that. The 300zx I drove which was auto felt so sluggish it wasn't funny. Very slow off the mark. Though I haven't driven a manual, I can't see it being any worse.

Link to comment
https://www.sau.com.au/forums/topic/8978-skyline-vs-300zx/#findComment-133550
Share on other sites

300zx are slow due the weight. They make up for weight with the twin turbo if your getting the twin turbo version, also the engine has no space at all pointed out by someone. The power to weight ratio is not good as the skylines power to weight ratio. I like the looks of the skyline way better also the 300zx seems too phat for my liking. Thats just my opinion people may think differently.

My friends trueno 4age kept up to a 300zx non turbo to give you an idea.

Link to comment
https://www.sau.com.au/forums/topic/8978-skyline-vs-300zx/#findComment-134056
Share on other sites

Originally posted by GT-Rmgedon

I read in HPI (issue 23 i think) that 300zx's were really high maintenance and the VG30 engines were softer and could break easier under hard use. Aparently they were the worst performance engines Nissan ever produced. Go the Skyline if you want to deal with modding later on.

Gotta disagree with this, this engine (shared with local Maxima) has been regularly voted one of the world's best engines.

Link to comment
https://www.sau.com.au/forums/topic/8978-skyline-vs-300zx/#findComment-134081
Share on other sites

Originally posted by Duncan

Gotta disagree with this, this engine (shared with local Maxima) has been regularly voted one of the world's best engines.

well the people in japan using the r34 GTR shell uses the vg30 engine in the car to race as they don't allow 4wd cars something like that.

So i guess its reliable

Link to comment
https://www.sau.com.au/forums/topic/8978-skyline-vs-300zx/#findComment-134095
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...