Jump to content
SAU Community

6x9's In Parcal Shelf

bilbo117

By bilbo117,
in Car Audio & Electrical

 Share

Recommended Posts

bilbo117 Rising Star

bilbo117

Posted
Posted

I was wondering if anyone here has 6x9's in there parcal shelf and what modifications they had to get to fit? im on the border line of deciding wether to make a new parcal shelf which is thicker, and lift the 6x9 higher so it doesnt hit the shelf. please help! if u have 6x9's can u post a photo please?

Link to comment
https://www.sau.com.au/forums/topic/89807-6x9s-in-parcal-shelf/
Share on other sites
Anakha Rising Star

Anakha

Posted
Posted

I've only seen or heard about two ways to do this..

either just cut out the parcel tray enough to fit in the speakers (then use rubber surrounds or something if you like).. or I've also seen a guy build a kinda box for the shelf - the speakers were on like a 30 degree angle facing the cabin. It was quite interesting, looked pretty sweet, and worked :) (just be sure to cut the centre in order to see through your review mirror.

otherwise just go buy a couple of 6/6.5s :) I prefer them over 6*9s anyway

  • 2 weeks later...
r33freely Enthusiast

r33freely

Posted
Posted (edited)

i think they might sound better in the little boxes?

i have alpine type r 6" round speakers in the factory holes in my R33 and they sound shocking.... no bass at all from them and i think its because there not sorta sealed in a box kinda thing??

Dave

Edited by r33freely
MsG_ChRiS Community Regular

MsG_ChRiS

Posted
Posted (edited)

go for 6 inches if you are gonna have a sub or 2 if not go 6x9's [got to have bass =)]

best thing to do is make a new tray out of the thickest mdf u can fit ...

mount it back in with some bolts and foam tape <-- to stop any vibration ...

the more solid your parcel tray is the better ...

i will be trying to do this on the weekdend aswell as sound deaden the doors a fix the crazy rattles comming from my boot

cause at the moment my car sound like a marca on steroids =(

oh and whatever you do make sure you cater for child restraints its illegal not to have them !!!

just out of curiousity whats the front stage of you system like???

Edited by MsG_ChRiS
Fly-By Enthusiast

Fly-By

Posted
Posted
You serious?  That sucks as I can't put them back in :D

I realised that after i put in my speakers too.

I have the same setup as elbee.

I wouldnt recommend hacking into your parcel tray. looks a bit messy and once u do it its doen foreever..

I got a thick bit of mdf, and basically cut it to shape using the existing parcel tray. Has to be slightly smaller coz it sits higher, and the angle of the window comes into it. The wood is about 2 cm thick. sat the 6x 9s into it. There isnt much room to move and play with, and the speakers sit at a 45 degree angle like in elbees pic.

Thick wood and a bit of foam tape around the bottom to stop it vibrating from the bass the sub pumps out and your set.

Sounds really good.

Might be an idea to cut some holes into it and cover it with carpet or vinyl so the boot isnt completely sealed. Want to let some sound waves through!

satanic Grand Master

satanic

Posted
Posted

Too late now :) I think I'll look into it when I install an amp / sub...

ATM it still looks like I have three harness mounts, I re-used the original grills so I could retain the top half of the harness mounting (held on using double sided velcro). If I get told off for it, I'll replace it then.

Thanks for your help though :)

  • 2 weeks later...
POOMBAH Proficient

POOMBAH

Posted
Posted
no its not you need one for each seatbelt so three in total

Hmm, I just finished installing some JBL 3 way 6's in the back and now the metal brackets for the child restraints don't fit as the tweeters get in the way :cheers: any ideas?

  • 2 weeks later...
Fangz Collaborator

Fangz

Posted
Posted

just installed 6 inch cones in my rear parcel shelf with a subbie and my system is rocking. Just remember when you cut into the rear parchel shelf (The metal) your car can be defected for it.

u can also b rejected when u go for your pink slip then u would have 2 weld in a new shelf.....is illegal 2 cut any meyal in your shelf

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...