Jump to content
SAU Community

Recommended Posts

Hey guys,

Has anyone got thier suspension shocks reconditioned in Perth?

I've got Nismo S-Tune Coilovers and they've started knocking in the rear lately, thinking they possibly need to be rebuilt?

If you've had it done what sort of prices am I looking at?

Cheers,

-Kym

Link to comment
https://www.sau.com.au/forums/topic/89870-shock-reconditioners-in-perth/
Share on other sites

Looking at getting my JIC coilovers rebuilt by Xspeed...they said about $760 per end (about $1500 for all 4) so I guess they could do your Nismo's too.

If you find anywhere else that is cheaper let me know :P

Yeah to TSR in QLD as dsturbd said

If they knocking might just be the pivot ball in the top hat on the rear

strict9 If you find a local post it up, there was local that was rebuilding coilies here and muffing them right up

They've done many pairs for me they are tops

Resealin leakers $140ea Reseal and reshaft $300ea

Looking at getting my JIC coilovers rebuilt by Xspeed...they said about $760 per end (about $1500 for all 4) so I guess they could do your Nismo's too.

If you find anywhere else that is cheaper let me know :P

Ouch!! That's expensive. I sent the coilovers from my GTR (Toda Fightex) to Wilkinson's, they were pretty shagged out, got them back 2 weeks later and my bill was only $860 for all 4.

My Ohlins shocks have just given up the ghost in the rear, So I bought genuine GTR shocks and springs for $200 for the pair swapped them over in like 20 minutes yesterday.... Ride is a lot softer in the rear, Now looking to get the rear two shocks resealed. So now looking for someone to reseal them.Wilkinson's could be a green light, but I will shop around.

Mike

Ouch!! That's expensive. I sent the coilovers from my GTR (Toda Fightex) to Wilkinson's, they were pretty shagged out, got them back 2 weeks later and my bill was only $860  for all 4.

cool...where abouts are Wilkinson's?

Have you got them back on? are they nice and solid again?

Its really only my rears that are stuffed like Mike_R32_GTR's...rear bounces down the road like an old yank tank :D

Wilkinson's are in beechboro, but they have really long hours. I dropped mine off at like 7:15am and they were open, and i think they're open until 6pm or thereabouts at night.

Yeah I can't complain, they are an awesome set of coilovers though, full aluminium struts, these babies were designed for the track not the street lol but they are great. They felt awful when they were leaking, and the car handled like absolute s**t. My rears were the main problem, but as so much on the car had needed fixing / replacing I decided to get all 4 done so I didn't have to worry about them.

I had a little issue that was fixed by wilko's for free, they honoured the job as the shocks had been rebuilt only 3 months prior, one of the coilovers started leaking, the fault had nothing to do with wilkinson's, but I think whoever rebuilt them in the east may not have aligned something perfectly, or something little like that. I dropped it off and it was ready to be picked up 3 days later, can't complain about that!!

No problems in any other respect, and the coilover that was sent back again has been a charm ever since. I would definately recommend wilkinson's, their service was excellent and I found them to be very helpful :blink:

Edited by randominsanity73

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...