Jump to content
SAU Community

Recommended Posts

I had the same problem.

Switched to Redline Superlight weight shock proof!!

It's now a dream to drive, whether its a cold start or up to temp. it's faultless.

It's expensive at about $135gal. (you would use just under a US gallon for a Skyline Gearbox)

I strongly recommend it if you want results :)

Link to comment
https://www.sau.com.au/forums/topic/90100-redline-or-motul/#findComment-1625454
Share on other sites

My car is crunching gears,  :O  (recently serviced). I doubt it's the synchro's as the car has only done 85,000 and I don't drive it like crazy.

Which gearbox oil is better, redline or motul with graphite in it?  :D

If you can get some Kendall synthetic gear oil you will be very suprised how much better your gear change is. Also I slipped some Slick 50 in as well.

Link to comment
https://www.sau.com.au/forums/topic/90100-redline-or-motul/#findComment-1629238
Share on other sites

Firstly, I believe there are 3 oils in the Shockproof Gear Oil range. Superlightweight, Lightweight and Heavyweight.

From what I understand, if your car use is "normal" and your box is in good condition, you should use the Superlight Weight.

For older g/box's and/or for more abusive use ( track use etc. ) go the Lightweight.

Then the Heavyweight is for dog box's etc and extreme power / usage.

But even after saying that, I'll be using the Lightweight Shockproof in my fully overhauled g/box only because I've used it before and know how well it works.

Hope that helps some :(

Link to comment
https://www.sau.com.au/forums/topic/90100-redline-or-motul/#findComment-1638070
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
    • Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
×
×
  • Create New...