Jump to content
SAU Community

Recommended Posts

Go and see Japanese Motor Sport, they are experts with skylines bot standard and locked diff. They will also probably be the best and cheapest way to get it fixed if it's busted.

The have both standard and aftermarket diffs in stock.

Mechanicals are wierd in their operation.

You've really got to see a pic of one to understand.

Basically when you apply power (and there is a power difference between the wheels and the motor) the force will push out some rods or spindles things that lock the wheels together.

That puk puk puk puk noise that you hear when going around slow tight corners under power is the inside wheel skipping/spining accross the road.

Remember that the inside wheel will be wanting to spin as fast as the outside wheel but has a shorter distance to travel cause your urning a corner, so the wheel will actaully spin a bit.

Mechanical are good fro drift work, great for track work, and amazing for drags. Basically the most traction you'll get from a 2wd car is a straight line.

Some LSD will swap the power from one wheel to the next which will cause fishtailing - not a good thing. with a mechanical there is always a 50/50 split, even when you start spining the wheels.

God I hope that makes sense ????

J

I think thats your wheels spinning XrSiSt

Thats perfectly normal..

I raced an R33 with a locked Diff.. he wrecked me.. I just kept spinning the wheels (with 255s on the ass) My car had heaps more power then his, but he was able to put his less power car to the ground better.

I say.. if you want a straight line car, and soley want it for dragging... stick with the locker..

But for everyday use, and just a few squirts here and there, the stock LSD item is sufficient ;)

The diff is probably different BUT..

When I had the VS V8 IRS Manual Commodore the diff first started to open wheel a little especially in the wet.

Then idling around corners with no accelerator slow speeds it felt like the diff was a slight locker. i.e the arse end would wobble a bit.

It started to get worse where if i was not perfectly in a straight line and riding the clutch waiting for traffic rolling back then creeping forward a little the diff would make the car have that slight wobble in the arse end like it was a locker and there was also like a slight click clunk type noise when the arse end was wobbling.

Then it all of a sudden was an open wheeler (occasional twin) then the bearings started making a loud grrrrrrrrrrrr on acceleration.

Apparently the bearings where buggered and also the cones which are like the clutch packs or what ever they are..

Replaced everything cost $1000 and the diff was tight enough that on full lock in a servo with the shinny surface the inside wheel would chirp.

Diff then whinned for a little after it was rebuild ?!?

He told me the diff had to be lapped in or somthing.

Anyway it did. whine stopped just before i sold the car thank god...

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Curious to see how the SpeedTek stuff holds up
    • The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
    • I don't believe I posted pictures of the second oil pump pickup I added so here they are. Data shows it gets oil pressure up to the relief pressure much earlier in the RPM. Is that important? Not likely... This was just another attempt to fix the bearing issues.   I also heavily opened up the inlet to the pump since it now had to flow oil from two pickups. I believe the diameter increased about 1/8".
×
×
  • Create New...