Jump to content
SAU Community

Recommended Posts

Go and see Japanese Motor Sport, they are experts with skylines bot standard and locked diff. They will also probably be the best and cheapest way to get it fixed if it's busted.

The have both standard and aftermarket diffs in stock.

Mechanicals are wierd in their operation.

You've really got to see a pic of one to understand.

Basically when you apply power (and there is a power difference between the wheels and the motor) the force will push out some rods or spindles things that lock the wheels together.

That puk puk puk puk noise that you hear when going around slow tight corners under power is the inside wheel skipping/spining accross the road.

Remember that the inside wheel will be wanting to spin as fast as the outside wheel but has a shorter distance to travel cause your urning a corner, so the wheel will actaully spin a bit.

Mechanical are good fro drift work, great for track work, and amazing for drags. Basically the most traction you'll get from a 2wd car is a straight line.

Some LSD will swap the power from one wheel to the next which will cause fishtailing - not a good thing. with a mechanical there is always a 50/50 split, even when you start spining the wheels.

God I hope that makes sense ????

J

I think thats your wheels spinning XrSiSt

Thats perfectly normal..

I raced an R33 with a locked Diff.. he wrecked me.. I just kept spinning the wheels (with 255s on the ass) My car had heaps more power then his, but he was able to put his less power car to the ground better.

I say.. if you want a straight line car, and soley want it for dragging... stick with the locker..

But for everyday use, and just a few squirts here and there, the stock LSD item is sufficient ;)

The diff is probably different BUT..

When I had the VS V8 IRS Manual Commodore the diff first started to open wheel a little especially in the wet.

Then idling around corners with no accelerator slow speeds it felt like the diff was a slight locker. i.e the arse end would wobble a bit.

It started to get worse where if i was not perfectly in a straight line and riding the clutch waiting for traffic rolling back then creeping forward a little the diff would make the car have that slight wobble in the arse end like it was a locker and there was also like a slight click clunk type noise when the arse end was wobbling.

Then it all of a sudden was an open wheeler (occasional twin) then the bearings started making a loud grrrrrrrrrrrr on acceleration.

Apparently the bearings where buggered and also the cones which are like the clutch packs or what ever they are..

Replaced everything cost $1000 and the diff was tight enough that on full lock in a servo with the shinny surface the inside wheel would chirp.

Diff then whinned for a little after it was rebuild ?!?

He told me the diff had to be lapped in or somthing.

Anyway it did. whine stopped just before i sold the car thank god...

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Heres another fitment photo. redrilled the pattern to 5x112, and threw my audi´s rims on. had to touch the upper control arms with grinder, because the "sharp corner" was sticking about 2-3mm on the tire path. i have the "fender lip" mostly cut off, otherwise these (too) would contact with it. 20x9.5 ET25 rear    265/30 20x8.5 ET20 front    255/30 they are temporary, and look too big for the chassis. searching for 19s to it.
    • From experience, it will come back to bite you haha.
    • Background: my BMW 225i hatchback (rebodied MINI/X1) came with 3x RE003 and 1x Goodyear Asymmetric something. The RE003 roared and slid around, the Goodyear side was quiet and grippy. Definitely my car was thrashed before it got sent to dealers. My brother also got RE003 all round on his old VA WRX STI, I wasn't impressed with them, car was loud so can't comment on noise. Anyway, Hankook stopped making/updating V12 Evo2. So bought S1 Evo3 runflats. Great daily duties tyre and not that harsh ride. Tyre reviews site/youtube rated them as best stopping in the rain and I believe them. Next set, Goodyear Asymmetric 5 non-RFT. It beat PS4 in tests and is like $100 cheaper, so put them on. Great tyre, more grip then S1 Evo3 but a tad noisier as expected, still rocking them. Next set I am looking to go runflats, probably the new Hankook Evo. Although the new Pirelli PZ5 did well in tyrereviews test. Or go Goodyear Asymmetric 6 which was top tyre last year. The V12 Evo2 on my gen5 Liberty GT wagon did great in cold condition (drove to snowy mountains for a day so my husky can feel his ancestor's roots). Super impressive performance for $120 each lol. Never skimp on tyres, brakes, suspension. There's old pics of my R31's crappy random brake pads bending in the caliper at Oran Park track day somewhere around here. Anyway, my 2 cents.
    • I said "Matlab clone". I could throw one onto one of my linux VMs. Probably only take 10 or 20 hours to sort out the dependencies, relearn how to use it, etc etc.
×
×
  • Create New...