Jump to content
SAU Community

Recommended Posts

Driving to work on the M2 just after the tolls on the M2 heading

East i see this patty wagon with lights and then i see 4 police officers

around a car...

what do i see is apparently a stolen R32 GTR with an aftermaret Cwest Style Wing.

y do i suspect that it is stolen? b/c it had all that power stuff that they used to

finger print it.

looks like that it was used for a joy ride and just dumped there.

i didnt get the plates as i was heading the other direction.

i just wanted to post this up just in case someone here owns it....

so they know where it is

anyone else see it?

Link to comment
https://www.sau.com.au/forums/topic/91471-stolen-r32-gtr-m2/
Share on other sites

Driving to work on the M2 just after the tolls on the M2 heading

East i see this patty wagon with lights and then i see 4 police officers

around a car...

what do i see is apparently a stolen R32 GTR with an aftermaret Cwest Style Wing.

y do i suspect that it is stolen? b/c it had all that power stuff that they used to

finger print it.

looks like that it was used for a joy ride and just dumped there.

i didnt get the plates as i was heading the other direction.

i just wanted to post this up just in case someone here owns it....

so they know where it is

anyone else see it?

Hey hows it going guys.

Yea limmyR33, that was my weapon you saw on the side of the road.

;)

I have it back now, but i also have severe problems. I just imported it and it is the second time its been screwed over. The first time it was broken into in the shipping yard after only being in the country for 3 days, and now the car was stolen from a secure lock up garage.

They have caused a fair bit of damage to her aswell, during the first break in they stole the manual boost guage, disconnecting the HKS valve controller from everything, and breaking the dash. And now this time round they trashed every driver side dsah in the car, and pulled out the ignition barrel and disconnected the turbo timer. So pretty much the whole wiring in the car is screwed.

I took it in to be complied and she was blowing a shitload of brown smoke, i know there could be a thousand things wrong with it, but any one got any idea's what im up against. And some good workshops around the RYDE area or as close as they come, I have a couple of places in mind ( MRC, BEL Garage, etc), but if someone wants to throw me a lifeline of there experience it would be greatly appreciated.

Thanx Guys.

Edited by Cursed
there is a place in West ryde.

cant think of the name, hes pretty good, 2 guys I know on here take there cars to him, ill get name and number for you if you like?

i think i know who ur talking about, i think his name is John, his workshop is next to col's body shop and reece plumbing, not far from repco?

if it is then i also recomend him he is very good.

there is a place in West ryde.

cant think of the name, hes pretty good, 2 guys I know on here take there cars to him, ill get name and number for you if you like?

Yea Sl!m,

that would be awesome if you could mate. Thanx.

And Mass IT, yea i was thinking them, my mate from work is Mick's (from MRT) little brother, so im thinking that my best bet, but there WRX'y orientated. I was seeing if i could take it to a place that new RB26's like the back of their ass.

do they, i live around the corner from there. he tunes all my mates and my brothers, rotors too, he is good.

Yea man,

check out there web site.

http://www.mrtrally.com.au

Nick, who is Mick's brother said that they'll be able to do it for me, but apparently they cost an arm and a leg but i'll see if i can twist his arm.

LOL tell Nick you know me, Mass, and he will laugh and try hook you up. where abouts you live? have u seen nicks brothers car, John the STI, that thing is a weapon...

Nah Nick has shown me photo's of it though man,

dont they have some monster of a kit car they have been working on for drags.

Yea man i'm at work now, Nick just walked out to piss off home to tell his mum to cook him something for dinner, bitching about how only women should be in the kitchen, hahahahah ill tell him ive been talking to you on here man,

LOL tell Nick you know me, Mass, and he will laugh and try hook you up. where abouts you live? have u seen nicks brothers car, John the STI, that thing is a weapon...

Thanx Sl!m & Morgs,

you guys have been awesome,

shall your skylines be forever safe in the area.

And LimmyR33 thanx for the heads up.

yeh, it pushed 320 awkw, on only 12psi, he just fixed his dog box and installed a twin plate clutch, he can up the boost to 20psi and give it a shot of NOS, and aim at a low 10second 1/4 mile. thing is its not laggy at all....

yeh, it pushed 320 awkw, on only 12psi, he just fixed his dog box and installed a twin plate clutch, he can up the boost to 20psi and give it a shot of NOS, and aim at a low 10second 1/4 mile. thing is its not laggy at all....

Yea man,

that's nutz man.

What you drive man?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...