Jump to content
SAU Community

Stolen R32 Gtr M2

limmyR33

By limmyR33,
in New South Wales

 Share

Recommended Posts

limmyR33 Enthusiast

limmyR33

Posted
Posted

Driving to work on the M2 just after the tolls on the M2 heading

East i see this patty wagon with lights and then i see 4 police officers

around a car...

what do i see is apparently a stolen R32 GTR with an aftermaret Cwest Style Wing.

y do i suspect that it is stolen? b/c it had all that power stuff that they used to

finger print it.

looks like that it was used for a joy ride and just dumped there.

i didnt get the plates as i was heading the other direction.

i just wanted to post this up just in case someone here owns it....

so they know where it is

anyone else see it?

Link to comment
Share on other sites
Cursed Apprentice

Cursed

Posted
Posted (edited)
Driving to work on the M2 just after the tolls on the M2 heading

East i see this patty wagon with lights and then i see 4 police officers

around a car...

what do i see is apparently a stolen R32 GTR with an aftermaret Cwest Style Wing.

y do i suspect that it is stolen? b/c it had all that power stuff that they used to

finger print it.

looks like that it was used for a joy ride and just dumped there.

i didnt get the plates as i was heading the other direction.

i just wanted to post this up just in case someone here owns it....

so they know where it is

anyone else see it?

Hey hows it going guys.

Yea limmyR33, that was my weapon you saw on the side of the road.

;)

I have it back now, but i also have severe problems. I just imported it and it is the second time its been screwed over. The first time it was broken into in the shipping yard after only being in the country for 3 days, and now the car was stolen from a secure lock up garage.

They have caused a fair bit of damage to her aswell, during the first break in they stole the manual boost guage, disconnecting the HKS valve controller from everything, and breaking the dash. And now this time round they trashed every driver side dsah in the car, and pulled out the ignition barrel and disconnected the turbo timer. So pretty much the whole wiring in the car is screwed.

I took it in to be complied and she was blowing a shitload of brown smoke, i know there could be a thousand things wrong with it, but any one got any idea's what im up against. And some good workshops around the RYDE area or as close as they come, I have a couple of places in mind ( MRC, BEL Garage, etc), but if someone wants to throw me a lifeline of there experience it would be greatly appreciated.

Thanx Guys.

Edited by Cursed
Link to comment
Share on other sites
Sl!m Grand Master

Sl!m

Posted
Posted

there is a place in West ryde.

cant think of the name, hes pretty good, 2 guys I know on here take there cars to him, ill get name and number for you if you like?

Link to comment
Share on other sites
mass_iv Grand Master

mass_iv

Posted
Posted
there is a place in West ryde.

cant think of the name, hes pretty good, 2 guys I know on here take there cars to him, ill get name and number for you if you like?

i think i know who ur talking about, i think his name is John, his workshop is next to col's body shop and reece plumbing, not far from repco?

if it is then i also recomend him he is very good.

Link to comment
Share on other sites
Cursed Apprentice

Cursed

Posted
Posted
there is a place in West ryde.

cant think of the name, hes pretty good, 2 guys I know on here take there cars to him, ill get name and number for you if you like?

Yea Sl!m,

that would be awesome if you could mate. Thanx.

And Mass IT, yea i was thinking them, my mate from work is Mick's (from MRT) little brother, so im thinking that my best bet, but there WRX'y orientated. I was seeing if i could take it to a place that new RB26's like the back of their ass.

Link to comment
Share on other sites
Cursed Apprentice

Cursed

Posted
Posted
LOL tell Nick you know me, Mass, and he will laugh and try hook you up. where abouts you live? have u seen nicks brothers car, John the STI, that thing is a weapon...

Nah Nick has shown me photo's of it though man,

dont they have some monster of a kit car they have been working on for drags.

Yea man i'm at work now, Nick just walked out to piss off home to tell his mum to cook him something for dinner, bitching about how only women should be in the kitchen, hahahahah ill tell him ive been talking to you on here man,

Link to comment
Share on other sites
Cursed Apprentice

Cursed

Posted
Posted
LOL tell Nick you know me, Mass, and he will laugh and try hook you up. where abouts you live? have u seen nicks brothers car, John the STI, that thing is a weapon...

Thanx Sl!m & Morgs,

you guys have been awesome,

shall your skylines be forever safe in the area.

And LimmyR33 thanx for the heads up.

Link to comment
Share on other sites
mass_iv Grand Master

mass_iv

Posted
Posted

yeh, it pushed 320 awkw, on only 12psi, he just fixed his dog box and installed a twin plate clutch, he can up the boost to 20psi and give it a shot of NOS, and aim at a low 10second 1/4 mile. thing is its not laggy at all....

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Neostead2000
      rb20de neo +t conversion - boost pressure sensor needed?

      By Neostead2000 · Posted

      Agreed with the rest. Also at least based on my own research, there are no readily available stock or close-to-stock RB20Neo maps that you could download and use as a base were you to buy a complete standalone ECU, and the regular 20DET maps don't really work well so you'd need to take it to a tuner if you have no experience. I installed an AEM V2 on my 20Neo+T and had lots of headaches until I got it to run and idle properly but I've yet to remap it fully. You have to start building up your timing and fuel maps entirely from the ground up; even the ones for a 25 didn't work at all.
    • klutched
      GOT SUM's RB34

      By klutched · Posted

      Got some decent progress after work yesterday and also today. Got the ECU all wired and passenger side interior all back together. Kept the wiring up nice and high to avoid people standing on it. Got the surge tank relays rewired and tidied up the pump wiring and cut a hole to bring the cables through.  I found a spare USB cable I had lying around so I decided to cut it up and see if I could use it for my CAN 1 bus. Turned out one of the pins I needed was to the shield of the cable so i cut it up and desoldered it and resoldered to the correct pins.  Had the issue with the powersteering hose hitting the A/C compressor and fan shroud. I pulled the bracket off and modified it to remove the front mounting point which now clears it all. Will keep an eye on it to see if theres any signs of fouling once it's up and running.
    • hardsteppa
      R32 OEM rims name?

      By hardsteppa · Posted

      That's some good input mate. Nice.
    • PranK
      My BMW 335i

      By PranK · Posted

      So today I went well outside my comfort zone (again) to replace my valve cover gasket.  I have had a big leak over the exhaust leading to a lot of smoke and smell every time I drove it. The leak was in the rear driver's corner.  The job wasn't hard as such, just a bit finicky and time consuming.  The old gasket was rock hard and broken right where the leak was.  The leaky corner had so much sitting oil in it.  The good news to my amateur eyes was no buildup or sludge under the cover. It all looked fairly nice in there.   I haven't started it yet. I ran out of light and body when putting the coils and injector loom back in. Probs only 30min left for the morning.  I was so nervous putting the cover back on, I must have lifted it 5 times to make sure the gasket was still seated properly. God it's going to be nice to be leak free and not make other traffic light queuers think my car is about to explode.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      Gave the Mazda it's first wash, it will need some clay, a light compound, and polish polish to remove a few swirl marks, but that will be a job for when I have a full day to get my DA polisher action on
×
×
  • Create New...