Jump to content
SAU Community

Recommended Posts

Excellent!

Just what I wanted to see! As mine is tapering off (140ish), yours is still going up. My turbo is smaller, as it makes a bit more down low and earlier, but yours pulls away up top

Does your car still feel like its pulling hard right up to 7500rpm?

Yeah, I want to just pick up the last 2500rpm on mine thats all so a slightly larger turbo might be the way to do it

Rememeber, Japs use differant fuel to us, fair bit higher octane, so I'm sure if your car was running 101 or 103 RON fuel (whatever they use) you could get to 220rwkw at 14psi just by adding more timing

I'd be running it at least 20psi if I had a 2530, it would come on nice and quick, and be able to hold a decent amount of boost up top

If you look in the 260rwkws thread there is R31 POWER's plot and jnr32r's using 2535.

If you want more power with better response i dotn think you can get away with not having a good manifold. My setup seems to match the 2535s in response and makes more power....and the thing is plain bearing. You would have to think that the manifold helps out of sight as (LOL) most ppl you talk to tell you Trust turbos suck?!?!?!?!

Hey chris.I have 200+rwkw on about 16-17psi.It's a safe tune and not a power one.It feels good on the street with 16psi coming on at 3400-3500rpm and hard at 4000rpm.It holds 17psi and even more to redline hehe.

My boost curve is weird on the dyno graph and i don't know why but it seems fine on the road.

I might get another tune and hopefully see 220rwkw on 20psi.

HYPER31271rwhp.jpg

Last nights tuning went quite well

got the response back it was lacking after last weeks tuning

We adjusted the acuator on the turbo to try and bring it on faster and hold boost up top

It worked quite well, I photoshoped my last dyno as best I could (forgot to get print-out, as it was almost 7.40 and Shaun wanted to go home!)

Picked up about 40rwkw at 100km/h and a fair whack of torque to boot

Feels quite quick on the road now, lots of response!

Still need a bigger turbo, I'd swap all that mid-range for some top end! Would make a crazy drift setup now, comes on quite hard

With the acuator adjsuted, boost was a bit spiky, saw 1.7bar in 3rd this morning, so I had to adjust it down a little, as it was a bit erractic between 2nd, 3rd and 4th. Did get compressor surge at this boost, so it must be at its limit at 1.3/1.4 bar

Not bad for a 300PS rated turbo!

The dyno reminded me allot of a RB25 power curve

This dyno attached is approx what was achieved last night, when I get the printout, I will scan it and post it up

Chris

post-493-1129862367.jpg

It does have a adjustable acuator, but the thread was a little rusted and the nut was pretty locked

Shaun just ended up using a pry bar and gave the plate which holds the acuator a bit of a tweak to pre-load the spring a bit more

It didn't need much to get that result. Comes on pretty hard now

If you look in the 260rwkws thread there is R31 POWER's plot and jnr32r's using 2535.

If you want more power with better response i dotn think you can get away with not having a good manifold. My setup seems to match the 2535s in response and makes more power....and the thing is plain bearing. You would have to think that the manifold helps out of sight as (LOL) most ppl you talk to tell you Trust turbos suck?!?!?!?!

Yeah, agree, a good manifold would help if you are running a bigger turbo. 2510/2530 seem to run pretty good with the stock manifold, I think a 2535 would benefit from a decent exhaust manifold. 2530 i'm not so sure, it might bring it on sooner, but I reckon it would then struggle up top

I'm going to video my handcontroller to work out how quick it comes on, when driving its hard to see it all and concentrate on driving

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...