Jump to content
SAU Community

Recommended Posts

Might be looking to go banana bending in the future so I thought I'd ask peoples opinions on suburbs of brisbane..

you know..

where should I stay away from.. and so forth.

will probably be working in the city so I need to be within 15KM's or 20 minutes drive from the city center.

so name some suburbs for me that is ideal to live in.

I need to be in an area where I can have a lageish comfortable house with like large yard and double garage sort of layout.

budget is probably about $400K for the house.

name some suburbs so that I can do a domain search for hooses in those areas.

thanks.

Link to comment
https://www.sau.com.au/forums/topic/91924-brisbane-suburbs/
Share on other sites

Give me till June/July I'll have a newly completed reno for ya :(

Quitting professional life as an engineer to do reno's with the Missus, and I'll be focussing on the inner west and northern suburbs which tend to be leafier and prettier.

Throw up a whereis map and start to learn the layout a bit. You should do ok around Red Hill, The Gap, and well there are just so many good places so I gues elimination is better than posting all the good ones.

Link to comment
https://www.sau.com.au/forums/topic/91924-brisbane-suburbs/#findComment-1657846
Share on other sites

Basically almost anything with in 15km of the city is good! Im a bit reluctant to say certain suburbs are bad in case I offend people from there but most of the dodgy ones begin after around 1/2 an hours drive (Normal driving) from the city and are more likely to be on the south and west sides :(

Where I live, Yeronga, there are many large houses like you talk about and you could get one quite easliy for 400K, 350k being average for a 3 bedroom on a decent block and it is only 6 kns from the city which is 10 minutes by train for me.

Link to comment
https://www.sau.com.au/forums/topic/91924-brisbane-suburbs/#findComment-1657912
Share on other sites

I have been doing where is type searches..

and then going through domain to look for homes..

I found a couple of good places in TINGALPA (about 13km east of brisbane city or 20 minutes drive.)

example

http://www.domain.com.au/Public/PropertyDe...adid=2005077642

or a couple in Manly as it's close to the water.

Why is Wynnum a place to stay away from?

on the map it looks like a good location.. being close to the water and all.

thanks for your help all.

the example of the house from TINGALPA above is pretty much exactly the thing I am after.

same size and layout, even same sort of brick used outside.

any other points from anyone.. and if giving a reason as to why I should steer clear of some suburbs, please try to say why as well.

thanks

Link to comment
https://www.sau.com.au/forums/topic/91924-brisbane-suburbs/#findComment-1661961
Share on other sites

you can still get close to river front for $400k..

thats where the good money will be.

While you say 'close to the beaches' gtst.. the beaches up north of the city (redcliffe ,etc) , or south in manly, wellington point, etc are not really great swimming beaches or anything..

Link to comment
https://www.sau.com.au/forums/topic/91924-brisbane-suburbs/#findComment-1662413
Share on other sites

no waves, not too many sand beaches, bit mud flatty.. etc

Anyhow, this is in general terms from my travels to those sorts of areas now and then. Really you'd need to check it out for yourself.. just don't be expecting miles of pristine beaches or clear water like you find on the goldcoast, or further up north.

Link to comment
https://www.sau.com.au/forums/topic/91924-brisbane-suburbs/#findComment-1662605
Share on other sites

oh ok... good to know..

when you say not good swiming beaches, you mean dirty? or you mean no waves?

Those "beaches" are sort of mangrovey and sort of muddy rather than sandy! And no waves, Think mosquito breeding ground!

Link to comment
https://www.sau.com.au/forums/topic/91924-brisbane-suburbs/#findComment-1662608
Share on other sites

I have been doing where is type searches..

and then going through domain to look for homes..

I found a couple of good places in TINGALPA (about 13km east of brisbane city or 20 minutes drive.)

example

http://www.domain.com.au/Public/PropertyDe...adid=2005077642

or a couple in Manly as it's close to the water.

Why is Wynnum a place to stay away from?

on the map it looks like a good location.. being close to the water and all.

thanks for your help all.

the example of the house from TINGALPA above is pretty much exactly the thing I am after.

same size and layout, even same sort of brick used outside.

any other points from anyone.. and if giving a reason as to why I should steer clear of some suburbs, please try to say why as well.

thanks

yeah not bad that area that were we are keeping a eye on for a place soon good area I have been around the area for most of my life & its good mostly youngish familys in that area + theres a brand new shopping center that just been finished in the last six months 5 min away from that street, if ur after public transport though I would almost forget about it bayside/ redlands area has always had a bad bus service almost not there but if u like a layed back area thats what your looking for go for it as for wynnum just be carfull what parts u buy into its statring to boom rigth now though so prices are starting to come along fast.....

hope that helps......

Cheers Mike

Link to comment
https://www.sau.com.au/forums/topic/91924-brisbane-suburbs/#findComment-1664562
Share on other sites

Those "beaches" are sort of mangrovey and sort of muddy rather than sandy! And no waves, Think mosquito breeding ground!

lol there are so beaches out there :) just got to get your arse out to straddie u bunch of :) lol joken yeah thats another thing about that area your only 20 mins away if that from the water taxi or car ferri across to stradbroke island from here to there :D

oh & that map there is wrong the ferri departs from emmett drv not bloody oyster point stupid twats ;)

Link to comment
https://www.sau.com.au/forums/topic/91924-brisbane-suburbs/#findComment-1664569
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...