Jump to content
SAU Community

Recommended Posts

Hey all. I just got my R33 gtst back the other day. I was in canberra and on friday night i got it. Went on the cruise and met people at the museum and all and it was fine. drove like it used to, if not a little better.

saturday morning it wouldnt start. it sounded like it was about to kick over everytime i tried, so we called the NRMA. a dude came out (in about 5 minutes when they quoted 60 - 90) and he said that the sat. dishes and transmitting towers can affect the alarm i have, and f**k it up. so he just undid the battery and put it back, and it started.

from berra i drove to wollongong. the car feels like its missing a beat somewhere. when i take off, the whole car kinda shakes, and you can here it grumble, similar to a V8. at high revs its much less noticable, but when im taking off or accelerating a bit hard it comes back.

then this morning i go to start it again and it wont kick over. the same as when it first happened.

my brother reckons it could be the ingnition coils or plugs or something. has anyone ever had this problem or know of what could be causing it? also, its just had a massive service, timing belt, all electric, fixed it idle problem etc.

can anyone shed some light???

thanks.

Link to comment
https://www.sau.com.au/forums/topic/92218-r33-problem-sluggish-feel/
Share on other sites

When my R33's coils began to play up, i only noticed misfiring after the car got hot (30min of driving) but i never had a problem with starting it... and there was a misfire through out the rev range especially around 4000rpm.. Theres a thread in the DIY forum on changing spark plugs in a R33...

http://www.skylinesaustralia.com/forums/in...19&hl=R33+spark

have a look at the thread and follow the instructions on removing your coil packs, check them for any hair line cracks (causes misfiring) a high quality duct tape can be used to tape up the cracks which will help them work better for a period of time... if this helps then you need new packs and their not cheap... also with my R33 i found i had a fowled up spark plug (due to the faulty coil packs) also caused misfiring... so check plugs and coil pack... if all looks fine then its something else... you problem sounds either fuel or electrical related...

Check the following:

1. Spark plugs

2. Coil packs

3. Fuel pump (can you hear it when accesories is turned on?)

4. Injectors (run high quality injector cleaner with full tank of premium)

5. Air flow Meter (make sure sensor wire is clean and dirt free)

I hope this helps! Tell us how you go...

Regards,

Sarkis

Edited by QRI05E

hahaha well if you had any rare vintage like a 350GT Mustang... it would appretiate 5 - 10Gs value every year!

At the end of the day we are driving almost 10yr old cars, these things are expected to happen and its better to fix them properly 1st time round so they last longer... Nissan do build one of the best sports cars in the world!

Regards,

Sarkis

  • 9 years later...

Similar but replaced with ls1 coils, afrs are 11/10.5 full load and new plugs tps cas afm. First start of a morning runs like shit, as soon as oil pressure reaches more than half way it idles like its dropped a cylinder or two. Once warm its fixed untill flat out 2nd to 3rd change then starts almost flooding and running rough.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...