Jump to content
SAU Community

Recommended Posts

Hi guys,

As the title says im having some trouble with my 33 and have been for some time now.

When i was out one nite i decided to give it a bit of a fang, lit the tyres up bounced off the limiter n then lost total power.

After that the car would not idle at all, when i was slowing down and coming to a stop it just wanted to die. Also it blows heaps of blue smoke now (not 100% certain on colour but will update you all tomorrow in the light),

Well i thought it was turbo, so i pulled it out and had a look at it. Compressor wheels look fine, no dints no shaft play ncie n tight. Dump pipe, front pipe, intercooler the lot.

Then i went back and fitted everything back in, making double sure everything was connected properly especially all the hoses/pipes, also replaced dump/front pipe with BATMbl's 3" splitter, cleaned sensor screwed in dump pipe (o2 sensor?), also looked at afm (z32) n looks nice n clean.

Fired her up, idles nicely now at 1000rpm or there abouts, but still blows heaps of smoke.

I have as of tonite put in the power fc but wasnt able to start her up caus its got no bloody oil, so ill wait til tomorrow to see if this may fix it

Any idea what the problem is/could be?

Cheers in advance

Shane

Link to comment
https://www.sau.com.au/forums/topic/92299-r33-blowing-heaps-of-blue-smoke/
Share on other sites

ok lads

videod it running like poo the other nite n here is the vid...

http://www.vidilife.com/index.cfm?f=media....1CF-1&action=10

I plugged in the pfc and took some fuel out and now doesnt blow any smoke, but idles like u wouldnt believe, shudders like a mofo and wont rev passed 4000rpm

so its off to mercury motorsport on tuesday to see whats the problem

Well got it back from mercury yesterday.

They had a look at everything and said the problem was that the spark plugs were only done up finger tight and there was heaps of carbon build up on them.

So they replaced them and tuned my power fc and they said it was running heaaaaps rich, now she runs nice as and dynod up at 180.2 rwkw :)

Thanks for all the help guys :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you for the feedback bro. Looks like it’ll have to stay off the road till it gets an ecu 
    • Only if you do not You will not be able to drive it with any serious load without risk of it pinging, which will either slowly or rapidly kill it, depending on how bad it is.
    • Hi guys, I’m new to the GTR scene. Picked up an R33 GTR earlier this year that needs a lot of love. I’ve been going through the hot side, changing all the gaskets and while it was all off I managed to score a set of -9s. It still had the stock ceramics so I was pretty happy to get the 2860s.  I live in a small country in the pacific with 0 performance car scene. No dyno’s no performance parts, let alone stock parts for a skyline. I order everything from Australia and do it myself. This means I’ll be running the stock ECU. Maybe down the track I’ll get an aftermarket set up and do a remote tune.  Will the car run -9s on stock tune safely?  I have a very heavy foot so I really hope so 😂   thanks guys   
    • perfect, no rush to address the leaking bush then, it's not doing much/anything
    • I'm not sure if it will bolt up, but.... I'm reasonably sure that the ID of the runners is somewhat smaller on the NAs. So it probably wouldn't be a good match at the flange where the top and bottom meet. So that would be a reason to not do it. And the skinny runners would be the bit you're keeping, which would be a reason to no do it. You'd want the big runners if you were doing any work to swap stuff. Why not just use what you've got, like nearly everyone else who has +T'd an NA? You don't need or want the TCS throttle or other stuff that is specifically DET inlet/crossover.
×
×
  • Create New...