Jump to content
SAU Community

Recommended Posts

Greg: boot rattles... here we go hehehhe :) this the hardest area of any vehicle to stoff rattles and soundeaden :wave: there are a couple of options.....

1. put rubber matting in between the boot welds....

2. soundeadener in a can on the boot lid...

3. soundeaden matting on the boot lid...

4. after doing either one of these it looks cool to cover it up with a custom made interior panel to cover it over. not very expensive at all, hopefully that should fix it... it really is a common problem for any car.

by the way... screwing your number plate down with 4 screws (one in each corner) with a rectangle sheet of rubber matting behind it will stop your number plate from rattling almost completely :P let me know how it goes mate ;)

How to get rid of high pitched alternator noice once and for all ?? (I got it down to a bearable level, but is stil there)

Have tried the following :

Run RCA's and Power down seperate sides of the car -

Earthed the Amps as well as I can - (pretty farking good)

Tuned the amp hi pass and low pass filters as best I can.

Cheers,

brendanf: What it sounds like you need are some noise suppressors how many channels is the amp?

if it is four channels you will need 2 suppressors

if it is two channels you will need 1 suppressor

you can pick these up for $20-$25 from any decent audio store, they plug straight into your rca leads at you amplifier end :wave: let me know how you go brendanf

Originally posted by eliter33

Silver-Arrowz: hey man :wave: were you looking for the pro 3-way or 2-way components?

And yes i can get them  :)  they are an absolutely kick ass set of splits  :P highly recommended

I was looking at the 2 way. Had a listen to them, also the MB quartz and dynaudio. Boston sounds more warm.MB too sharp and dynaudio sounds a bit dull. They're not suited to my style of music.

Originally posted by eliter33

i agree, the Bostons do sound warm and great  :P have you gotten any prices so far on them? when did you want them?   ;)

Best retail price I've got is 800. In about 3 or 5 months. I can get them now but no point since I've got no amp. I figured do both at the same time.

Silver-Arrowz

when you want them let me know. the focals are good too, i sell both; but i certainly know which i prefer, i would always go for the bostons, they have a really distinctive sound i think :D let me know either way :)

akeenan:

i didnt know anyone still used compression horns, i have a set at work but they are hard as shit to sell because it is hard to find the right person (let alone right car!!!) to fit them in hehehe :) horns are the bomb when it comes to quality in a lot of respects though :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • R32 pics Not sure if you can upload pics directly, but i've added them through an imgur link above.
    • There’s a possibility that Infinity G35x front hubs may be compatible, but it depends on the exact fitment. Sometimes, parts like hub and bearing assemblies from different models can work if the bolt patterns, bearing sizes, and axle specifications match, but the G35x hubs typically have a different design. It's worth checking detailed specs (like the number of bolt holes, size of the axle shaft, and bearing diameter) to compare, as Rock Auto does list some parts that cross over across different models. If you're going for a pre-pressed hub and bearing unit, that could be a good option. These units are usually easier to install, as the bearing and hub come pre-assembled, but you’ll still need to verify fitment, especially the outer diameter of the hub and bearing dimensions.
    • Love the input man! Defo gonna check it out
    • 1994 Series 3 R32 GTR. Freshly built as the perfect weekender. Has many brand new Nissan OEM pieces (some you can no longer source). Last serviced (April 2024) at V Spec Performance, Melbourne, Australia. Feel free to DM me if any questions. Asking price: $190,000 AUD.  Engine RB26DETT Original 05U block Factory R32 crankshaft CP 86.5mm forged pistons Spool forged rods Factory cylinder head – rebuilt Factory valve train Factory camshafts Factory inlet manifold Factory throttle body Garrett dash -5 turbos Custom intercooler piping with Plazmaman clamps Plazamaman 100mm race intercooler Turbosmart BOV Tomei fuel rail 660cc injectors Goodridge 9000 series fuel lines with crimped fittings Stainless steel front pipes Tomei titanium exhaust with stainless steel cat converter Spit fire coils Powder coated rocket covers New Nissan coil pack emblem badge Fully repainted engine bay in Factory Black Refurbished ABS unit New Nissan brake master cylinder New Nissan brake lines New Nissan clutch master cylinder New Nissan washer bottles Custom catch can (powder coated with Goodridge lines) Steering rack rebuilt New Nissan power steering lines New Nissan AC lines A/C compressor refurbished AC condenser refurbished HPI radiator and new thermos fanes New radiator fans NOTE: All nuts, bolts, fixings new or zinc coated Driveline Factory 5 speed gear box rebuilt Xtreme twin plate clutch Stainless steel clutch line Rebuilt factory transfer case Custom one-piece tail shaft Rebuilt factory front diff Rebuilt factory rear diff Suspension HICAS deleted Bilstein dampers IKEYA formular front and rear arms and tie rod ends New bushes wherever possible Whiteline anti roll bars (underneath car only) Brakes Brembo F50 front callipers – 4 piston AP racing 380*32 front rotors, J Hook design Custom floating hat and calliper mounts Brembo 4 piston rear callipers PFC pads Stainless steel braided brake lines Body New Factory Black paint job Ceramic coated exterior panels New Nissan aluminium bonnet (super rare) New Nissan headlights (super rare) New Nissan indicators New Nissan front bar New Nissan front lower lip New Nissan head light and bonnet seals New Nissan windscreen cowling New Nissan wiper arms and wiper blades New aftermarket windscreen New Nissan windscreen seal New Nissan front doors window surrounds and seals New Nissan rear quarter windows (must replace for proper paint job) New Nissan rear window surrounds and seals New Nissan side skirts New Nissan boot badges New Nismo rear bonnet lip New Nissan guard liners Interior New Nissan lens cover over cluster New Nissan gear boot shift New Nissan gear knob New Nismo steering wheel New Nismo floor mats New Billet Handbrake lever New Nissan OEM pocket facia to replace radio Underbody Original stone guard removed and new stone guard coating applied Powder coated front and rear cross members Fuel lines painted to match factory colours Fuel tank removed, cleaned, repainted and refitted All nuts and fixings cleaned, repaired and zinc plated Wheels Rays/Volk racing TE37 18 x 10.5 + 15 in Bronze Yokahama A050 265 x 35 x 18                         
×
×
  • Create New...