Jump to content
SAU Community

Recommended Posts

Hi all,

I've got all tomorrow off work, so i'll be heading out to WSID. I'll be at the gates at 4:45pm as i'd like to get in early.

If anyone see's me, feel free to come say hi.

I've just got a R33 GTS-T with an exhaust and Falken Ziex tyres, so i'm not expecting good times, but it will be good fun..

Hope to see some of you there ;)

Regards,

Tommo.

Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/
Share on other sites

It was a pretty good night, although damn hot and humid, which my stock side mount didn't like too much at all.

Managed to get a 14.3 @ 96mph anyway.

R33 GTS-T with turbo back exhaust, 8psi, and falken Ziex tyres.

Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/#findComment-1669171
Share on other sites

Not bad, do you have nails in both tyres as i saw both sparking? Im guessing these were 2nd gear burnouts.

How many runs did you get in?

Yeah 2nd gear burnouts... I think in the right one I just had a rock because that was the only time it did it... so dodgy though - so i've booked in to get new tyres on Tuesday :) Both tyres only spark in the first video (tommowsid.avi)

Managed to get 5 runs in, between 6pm and 8:30pm (at that point, my tyres were pretty much bald and it wasn't going to get any colder :))

I'd also gotten 96mph in EVERY one of my runs, just with a different 60ft time.. I figured the only way I was going to get faster is with a better MPH, which just wasn't going to happen.

DSC_1738.jpg

Edited by TommO
Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/#findComment-1671348
Share on other sites

Funny you say about 2nd gear burnouts, but i started doing these and on every occassion i couldnt grab 3rd gear on my run. I thought something is wrong with the box and i started to get quotes on a new gearbox. So next runs, i swapped back to only 1st gear burnouts and now i hit 3rd gear every time. Weird hey

Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/#findComment-1672727
Share on other sites

I had no problems selecting gears throughout the run? Sucks to hear about that problem, I haven't experienced that though.

Wilch: I know what you mean, I read that too, so I played around with it myseld. In the end, the bigger burnout I did, the better 60ft I was getting. Thats the thing, the Falken Ziex's have a very very high temperature rating as to when they become sticky, and the big burnouts got them there :) I tried a little first gear burnout on my first run and it spun a lot off the line... :O

edit: I got a best of 2.100 60ft time.... not too great but not too shitty either :D

Edited by TommO
Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/#findComment-1673203
Share on other sites

Believe me, a 2.1 60" on those rubbish tyres is pretty good. The best I could manage on the same tyres was a 2.2 with plenty of 2.3-2.5's in there for good measure. Whether I did a burnout or not didn't really make any difference to my times.

A set of sticky tyres would drop you into the 13's without any problems at all - they basically dropped me from a 13.7 to a 12.9 (with a few other small mods).

Back on street tyres though, what are you replacing the Falkens with Tommo?

I'm going to get rid of mine as well, just trying to get another opinion on what tyres to replace them with (was thinking either Toyo T1R's or Goodyear Revspec RS-02's).

Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/#findComment-1673570
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...