Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

hey i have been all the way through this thread..... can someone clarify for me...

i am after rear brake rotors for my ceffy..... its still 4 stud... from wat i can gather r33 na 4stud is the go?? or stocko silvia 4 stud??

if thats wrong wat else fits?? i have spent whole day today goin around different brake shops and the likes to find something.... note i dont have anything to go off wat was on there.... the car came with no rear rotors on it... aparently it has r32 calipers... my thoughts at moment after talkin to ppl is gettin some r32 rear calipers and redrilling them to 4stud to suit?? good plan??

any help would be awesome!!!

hey i have been all the way through this thread..... can someone clarify for me...

i am after rear brake rotors for my ceffy..... its still 4 stud... from wat i can gather r33 na 4stud is the go?? or stocko silvia 4 stud??

if thats wrong wat else fits?? i have spent whole day today goin around different brake shops and the likes to find something.... note i dont have anything to go off wat was on there.... the car came with no rear rotors on it... aparently it has r32 calipers... my thoughts at moment after talkin to ppl is gettin some r32 rear calipers and redrilling them to 4stud to suit?? good plan??

any help would be awesome!!!

Well the cefiro uses a drum in disc type handbrake, which rules out any silvia/200sx/180sx etc.

Has to be from a skyline or some other model with the drum handbrake.

Take a photo of the caliper and we'll be able to tell you if they are skyline brakes. The R33 and R32 rear brakes are the same size.

hey guys, im new to this and need a bit of help

i just got myself a C33 Laurel ...

and i got a few things i need.

What exhaust would be simular to the same ?

R32 4 door?

S13?

obviously A31 will be the same

what fuel pump cradle is the same?

R32?

S13?

R31?

over flow bottle and windscreen washer bottle

A31?

R32?

S13?

seat belts

A31?

i heard rumors of R32 GTR?

I hope someone can help me with these as i have an I.D. inspection coming up soon.

Adam.

Well the cefiro uses a drum in disc type handbrake, which rules out any silvia/200sx/180sx etc.

Has to be from a skyline or some other model with the drum handbrake.

Take a photo of the caliper and we'll be able to tell you if they are skyline brakes. The R33 and R32 rear brakes are the same size.

cheers for ya reply mate i had a hell of a time gettin the bits for it.... i'm new to all this cefiro and basically nissan stuff.... took 2 days of messin around but i got there..... turns out the brakes had been changed to r32 calipers so skyline stuff it was.... couldnt find 4 stud skyline stuff without detatchin an arm and sellin it so some r32 5 stud rear rotors i got for decent price i got drilled to the 4 stud in the end.... i was told as a last resort i'd have to do that haha but yeah got there finally..... only to stick it all on bleed it up and find a caliper is seized as well..... soooooo if anyone has a drivers side r32 rear caliper kickin around feel free to let me know haha or wat i can do to un seize it???

these cefiros are a bit of a bastard car!! haha all different bits from all kinds of nissan models fit it by sounds of it!! gonna be an interesting relationship with this car haha many a swear word has been spoken to it already!!

hi, does the r32 gtr speedo cable fit onto cefiro A31???

if not then which speedo cable would direct fit onto the cefiro?

thanks

aki

just buy a cefiro one, they're only $65 brand new from Nissan

seat belts

A31?

i heard rumors of R32 GTR?

I hope someone can help me with these as i have an I.D. inspection coming up soon.

Adam.

Seat belts are hard for C33s as they are pillarless. I got a set out of a Cima. These tend to be the better belts as it has a 2nd buckly that allows you to unclip the top mount from the bottom mount and you can fold away the passenger side sealt belt. You'll need the seat buckles also as they are different to the C33.

seat belts

A31?

i heard rumors of R32 GTR?

I hope someone can help me with these as i have an I.D. inspection coming up soon.

Adam.

Seat belts are hard for C33s as they are pillarless. I got a set out of a Cima. These tend to be the better belts as it has a 2nd buckle that allows you to unclip the top mount from the bottom mount and you can fold away the passenger side seat belt. You'll need the seat buckles also as they are different to the C33.

would the z32 300zx have the same belts ...... im having very little luck on nissan fast ....

I doubt they would as those seatbelts would be designed to secure to the B pillar itself, not the roof. You need to look at pillarless cars that have a lengthened B pillar arm so that it can bolt to the roof not the b pillar. i.e. Y31 Cima, R31 Passage, C33 Laurel of course. Good Luck.

  • 2 weeks later...

CD PLAYER / SPARE POCKET DIN MOUNTING BRACKETS:

R33 (cut the 90 degree bend out, and turn it upside down)

The brackets are different for every centre dash, so unfortunately A31 is alone in the dark.

J30 Maxima / A32^^ Maxima probably also fit from what I remember of the shape.

Edited by Nic_A31

What kind of exhaust was it? Factory? Aftermarket?

It doesn't seem logical that it would fit considering the longer wheelbase of the cefiro, would think that it would foul around the subframe and that the tailpipe would be too short?

What kind of exhaust was it? Factory? Aftermarket?

It doesn't seem logical that it would fit considering the longer wheelbase of the cefiro, would think that it would foul around the subframe and that the tailpipe would be too short?

the r32 2 door exhaust is 4-6 inches shorter than the 4 door version ...

considering that the laurel and cefiro are the r32 4 door floor pan vertually i thought i would measure it up .... and it came very very close (measured it up off the car as my laurel is in-mobile at the moment)

it was a 3.5 inch after market item had all the same bends and length as my 3' straight pipe

the r32 2 door exhaust is 4-6 inches shorter than the 4 door version ...

considering that the laurel and cefiro are the r32 4 door floor pan vertually i thought i would measure it up .... and it came very very close (measured it up off the car as my laurel is in-mobile at the moment)

it was a 3.5 inch after market item had all the same bends and length as my 3' straight pipe

are the chasis mounts in the same spots?

are the chasis mounts in the same spots?

the one just behind the cat is correct ...

the one near the rear bar is correct ....

the one (i think) before the diff cradle is about 30-50mm forward

well thats between these 2 exhausts ...

others could be different

  • 3 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...