Jump to content
SAU Community

Recommended Posts

But you havent tuned the AVCR with the Tial wastegate?

I am pretty sure it will have to be retuned to suit the differences between the wastegates.

yea it has to be touched up but it still should hold boost when it's switched off and it's not, i dunno what the f*&^%kn problem is but it's frustrating the shit out me

Cheers

anthony

Ok guys

all fixed after spending damn near 2 grand i found the problem.

First i got the car retuned, changed the cat, changed oil, sparkplugs, oilfilter, changed coilpacks, chanhged wastegat, all to find out it was the damn airfilter!!!!!!

2 grand for a Farkin $$140 airfilter all fixed and now pulls like a bitch! got the car retuned and she made 251.9 rwkw off 18psi and we tuned it back to 241.3rwkw off 16psi cause it started runin a little lean the good old RB still has it nin her!!!

Hitman said that once we get the fuel problem fixed should be able to make about 255 -260 safley and about 290rwkw off race fuel on 25psi.

all in all i'm damn happy with the car now and all that's said and done Hitman is a genious when it comes to EMS's

Well thanks for all the reply's guys.

Cheers

anthony

Edited by black sky
Ok guys

all fixed after spending damn near 2 grand i found the problem.

First i got the car retuned, changed the cat, changed oil, sparkplugs, oilfilter, changed coilpacks, chanhged wastegat, all to find out it was the damn airfilter!!!!!!

2 grand for a Farkin $$140 airfilter all fixed and now pulls like a bitch! got the car retuned and she made 251.9 rwkw off 18psi and we tuned it back to 241.3rwkw off 16psi cause it started runin a little lean the good old RB still has it nin her!!!

Hitman said that once we get the fuel problem fixed should be able to make about 255 -260 safley and about 290rwkw off race fuel on 25psi.

all in all i'm damn happy with the car now and all that's said and done Hitman is a genious when it comes to EMS's

Well thanks for all the reply's guys.

Cheers

anthony

by airfilter do u mean that the intake pipe between the maf sensor and the turbo inlet was sucking closed?

by airfilter do u mean that the intake pipe between the maf sensor and the turbo inlet was sucking closed?

Na i got a metal pipe comin off my turbo to the airfilter and cause i got a microguess it just runs off a map sensor. I have no idea why it caused such a problem.

I was takin out the wastgate again to see if it was that. the gasket fell underneath the air filter and it wasn't on the ground, so i took the air filter off and procedded with the wastegate. the wastegate was fine and i forgot to put the airfilter back on, took the car for a drive and it was fine talk about lucky!!!!

Edited by black sky
Im interested to hear about what sort of revs the turbo begins to kick in. I bought a Master Power T3/T04e 500hp rated and would like to gain an idea about how the turbo will behave on my RB20. Im aiming for 240rwkw. Does youurs do much below 4000rpm?

to be honest mate it kicks in to full boost at a little after 4500rpm can't wait till the gt30r goes in it, should make full boost at about 4000rpm believe me that's a huge difference.

The GT30r has a .63 comp that's why and a .6 turbine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...