Jump to content
SAU Community

Recommended Posts

Hey guys, I'll make it more clear this time. I'm selling a WHITE TURBO FORD LASER GHIA 1986 HATCHBACK.

Here is the modification list:

* TRUST Front Mount Intercooler

* G REDDY BOV ($500 Worth)

* TURBOSMART Boost Controller (Single Stage Bleeder)

* BLITZ FATT Turbo Timer

* SPECO Boost Guage

* 16 INCH Speedy Mag Wheels With Bridgestone Tyres

* FULL 2.5 INCH Exhaust System

* KE TX3 Front Seats

* Autotechnica Steering Wheel

Sound System :

* WHOLE SYSTEM FULLY INSTALLED BY TISONICS

* Pioneer MP3/WMA Head Unit ($500)

* 2 x Clarion 12 Inch Subwoofers ($500)

* 2 x 6 Inch SoundStream Speakers In Rear ($200)

* 2 x 4 Inch SoundStream Speakers In Front ($200)

* 1 x BOSS Amp Equivalent to 4 x 70RMS Amp ($300)

* 1 x Rockford Fosgate Amp 2 x 100RMS

Alarm System : Full Tisonics Alarm System

The Car Has Done 280,000KM APPROX.

The Japanese Import engine has done APPROX 110,000KM.

There Are a couple of slight things wrong with the car, but nothing major. Just the paint is pretty average and the rear left brake caliper needs fixing.

Im selling the car because I have recently purchased a new car and I need the cash to mod this car.

Pictures are at : http://www.nissansilvia.com/forums/index.p...howtopic=121786

If anymore questions, please post in here or pm me or call my mobile no. 0438789080. Cheers, Michael.

Link to comment
https://www.sau.com.au/forums/topic/94340-for-sale-laser-turbo/
Share on other sites

if your after a daily driver iv got a 1990 Ford Capri.

resprayed in full red (not two toned)

its been lowered with lovells and its got some mags lol

looks very nice n tidy.

im only after 2000 as i need money to fix my 180

if your after a daily driver iv got a 1990 Ford Capri.

resprayed in full red (not two toned)

its been lowered with lovells and its got some mags lol

looks very nice n tidy.

im only after 2000 as i need money to fix my 180

A) where is it

B) got pics?

c) anymore info on it?

Please PM me :huh:

ill keep an eye on the thread.

im in melb, but havin a hard time findin somethin for a daily....this could be the best of both worlds. daily, with some punch :P

but yeah, dont want a couple grand of sound equip. in it

good luck :(

Its a sweet little car, im gonna miss it when it goes. But I just need the cash to do up my 200sx. Its a full sleeper with a LOT of balls and a wiked audio system for 3800! Come on people... It is a lot of fun to drive, much more fun than my 200sx actually... Put it on boost and you will see what I mean. Come on, havent got all year! ;).

2 grand? Hah... No offence man, but do you know how much I paid for this car about a year ago? More than 5 grand. I cant believe Im selling it so cheap and people offer me a third of what I paid for it after only one year of owning it and putting a lot of work into it. Im not saying its an immaculate show car by any means, but come on, make me a serious offer please! Cheers, mike.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
    • I haven’t yet cut the chassis, maybe I switch to a reverse flow. I’ve got the Intercooler mounted as I already had it but not cut yet. Might have to speak to an engineer 
    • Yes that’s another issue, I always have a front mount, plus will be turbo plus intake will big hasstle. I’ve been told if it looks stock they’re fine with it by a couple others who have done it ahahaha.    I know @Kinkstaah said the stock gtt airbox is limiting but I might just have to do that to avoid a defect so it atleast looks legit. Or an enclosed pod so it’s hidden away and feed air from the snorkel and below Intercooler holes like kinstaah mentioned. Hmm what to do 
×
×
  • Create New...