Jump to content
SAU Community

Recommended Posts

hey guys, just joined up coz i need some opinions.

moved to qld from south of perth 8 weeks ago. we de-tuned the engine so there isnt any detonation on regular unleaded because wasnt sure if premium was going to be available on the nullabor on the way here as i drove. currently making 285rwhp but we have taken a lot of timing out of it and boost needs to be turned up another 5 pound as well as taking off permanent closed loop etc etc.

unsure who to take it to because have heard reports of qld tuners trying to blow up motors on dyno to get rebuild from owners. preferably need someone who is good with power fc. i want her back up into the 400's and not blow up in the tuning process.

thanks for any help

Link to comment
https://www.sau.com.au/forums/topic/94398-brisbane-tuners/
Share on other sites

just to add another opinion i did do a search on the qld section and it showed up bugger all. i looked for 'garage' 'mechanic' 'tuner' 'workshop' and got about 1 result for the place that used to be ADD. i just know of mercury from my mate.

Link to comment
https://www.sau.com.au/forums/topic/94398-brisbane-tuners/#findComment-1704279
Share on other sites

Brisbane Turbo and Tuning centre come highly recommended by many people.

Mercury are good and one of the Forum sponsors.

Chapman and Chapman are quite good, they know their stuff.

Milanco are also very good and focus on customer service.

Link to comment
https://www.sau.com.au/forums/topic/94398-brisbane-tuners/#findComment-1704856
Share on other sites

just to add another opinion i did do a search on the qld section and it showed up bugger all. i looked for 'garage' 'mechanic' 'tuner' 'workshop' and got about 1 result for the place that used to be ADD. i just know of mercury from my mate.

You're kidding right?...

Link to comment
https://www.sau.com.au/forums/topic/94398-brisbane-tuners/#findComment-1704942
Share on other sites

i have head a Few storIeS abouT one of the above listed workshops and would think twice about going there, dont get me wrong, i have seen some good work come out of there to, why dont you go in and have a first hand look at some of the workshops for your self before you decide on anything.

Mike.

Link to comment
https://www.sau.com.au/forums/topic/94398-brisbane-tuners/#findComment-1705358
Share on other sites

Obvisously there are going to always be a few people woth bad experiences. BTTC are the only ones who have done the right thing by a couple of my other mates.

Charlies are CRIMINALS! Every person I knopw that has gone there has been ripped off. Stuffed tunes, false reporting....you name it.

Link to comment
https://www.sau.com.au/forums/topic/94398-brisbane-tuners/#findComment-1706733
Share on other sites

what about MazFix ?

If you got a microtech and rotors I hear they are good...

Few things. Depends on what computer is being run, what your car is as not everyone has an 4wd dyno. Because if someone has NO idea, they might be the worlds best tuner with say a motec, but usless on wolf3d. But I would say APC, PITS, or 101. There was a guy up toowoomba way as well, but I think he has moved as the workshop that used to recomend him now uses 101.

Link to comment
https://www.sau.com.au/forums/topic/94398-brisbane-tuners/#findComment-1707518
Share on other sites

while this thread is still here and i cbf searching even though i should, does anyone know the website for 101?

They are in Judds Ct, Slacks creek. Pop in a have a chat I don't think their website is very informative. But I try and find it. <_<

Link to comment
https://www.sau.com.au/forums/topic/94398-brisbane-tuners/#findComment-1715861
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...