Jump to content
SAU Community

Recommended Posts

I was under the impression that they were the same chassis so it would be just a bolt on situation.

Just like ive heard you can put an s13 front on a 180sx and vice versa (strawberry conversions)

Either way im not sure but since noone has replied i thought i'd state my opinion even though you are looking for fact, sorry man.

Edited by BigWill
Link to comment
https://www.sau.com.au/forums/topic/94784-gtr-bar-on-gtst/#findComment-1713921
Share on other sites

I've heard you need to get the factory gtr bars modded to fit onto Gtst's as they are a few mm's out of alignment, also maybe different mounting points?

Sorry I can't be of any further help, but it would be worth your while to ask around places like Unique Autosports as they specialise in nissans.

Link to comment
https://www.sau.com.au/forums/topic/94784-gtr-bar-on-gtst/#findComment-1714004
Share on other sites

I was under the impression that they were the same chassis so it would be just a bolt on situation.

Just like ive heard you can put an s13 front on a 180sx and vice versa (strawberry conversions)

Either way im not sure but since noone has replied i thought i'd state my opinion even though you are looking for fact, sorry man.

First of all it wont fit. You're better off buying a GTR style bar made to fit a GTS-t from someone like East Bear Sports in Japan.

Secondly, putting an S13 front on a 180SX IS NOT a Stawberry face conversion. Putting an S15 front end on any Silvia is a Strawberry Face Conversion. The name comes from the Japanese translation. In Japan, S15's are referred to as "ICHI GO". Now ICHI GO literally means ONE FIVE. However ICHIGO also means Strawberry. Hence why it's called a Strawberry Face Conversion.

Link to comment
https://www.sau.com.au/forums/topic/94784-gtr-bar-on-gtst/#findComment-1714661
Share on other sites

You sure it was a GENUINE NISSAN GTR bar and not a remake to suit a GTS-t?? The East Bear ones look FLAWLESS. If you didn't know you'd never pick it.

Also you don't know how much the bar was modified to fit as well.

Looks can be decieving

R34use21.jpg

R33use1.jpg

Link to comment
https://www.sau.com.au/forums/topic/94784-gtr-bar-on-gtst/#findComment-1717124
Share on other sites

if you have the front fenders, hood, bumper support bar and bumper off a GTR, then you can do a swap and it'll all bolt up with no problems and nasty gaps.

Probably cheaper to buy an east bear bumper to fit onto your standard mounting points though.

Link to comment
https://www.sau.com.au/forums/topic/94784-gtr-bar-on-gtst/#findComment-1723167
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...