Jump to content
SAU Community

Widest Legal Rim Size For Vicroads


Recommended Posts

Hey guys,

Sorry if this has been posted before.

But does anyone know what the widest legal wheel and tyre size is for an R33 GTST?

I've looked up vic roads, and as confusing as it is something about 25mm from the stock wheel on the model, but i've been told it can be any model variation of the car so does this mean 25mm ontop of the GTR wheels sizes?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/95304-widest-legal-rim-size-for-vicroads/
Share on other sites

there's a heap of rules with wheel sizes, but from what i learnt when speaking to vic roads (not for skyline however) its on the largest factory option.

Now, with the fords, eg, the AU series, they used to include the XR's. so basically, XRs had the 17" option from factory, so that meant the standard falcons with 15 or 16 inch rims could use the XR spec largest option and get bigger wheels that way.

not sure if they do it the same way for 33 GTS-T/GTR, but they could probably tell you that 1 if you rang and asked it specifically

Dont ask vicroads, they know shit, well if you talk to 5 people you will most likely get 5 different answers. In regards to wheel sizes. You may not go more than 1 inch (25mm) wider and no more than 15mm bigger in total rolling diameter. So in regards, if you look at the fords as dezz made an example of. Im sure the standard falcon with 16's or 15's (shrugs) has higher wall tyres than the xr's to keep the same rolling diameter. But i could be wrong, dunno for sure.

Ring up an engineer, and he will explain to you that you cannot change the trackwidth of the tyres.

Thats about it. Good luck

yeah, most people think that the rule is 2 inches bigger (diameter) than the largest factory option, but the guy i spoke to at vic roads gave me the detailed rules, and its all about maintaing the same rolling diameter (or staying within the limit which is like 15mm as james said)

thats why you have to lower your tyre profile the bigger your rims are...

well the tyre profile, 225 + 15 = 240, whats the gtr wheel sizes ??? u would get away going on the gtr tread sizes

Coupe this - that's not how profiles work

so what then is the max tyre profile? 225?

Jive - that's the width...

I don't get what either of you are talking about.

profile is a percentage of the tyre witdh:

eg. 225/50/16 will give a sidewall height of 50% of 225 = 112.5mm

and if (for arguments sake) a tyre size is:

385/35/18, the sidewall height is 35% of 385 = 135.75mm

Therefore, "low profile" does not always equal skinny side walls.

Example:

stock skyline R33 gtst tyre size is 205/50/16 (by memory)

therefore total rolling diameter is:

16" ----> 406.4mm

add sidewalls (two sidewalls) = 2 x 205 x 50% = 205mm

equals 611.4mm.

if then you go to an 18" wheel, you will have to drop the profile to match the rolling diameter, working backwards

say we want to fit a 235 width tyre:

18" ----> 457.2mm

therefore the sidewalls must be 611.4 - 457.2 = 154.2

therefore each sidewall is 77.1mm

as 77.1mm is a percentage of the width, the profile is 77.1/(tyre width)

profile = 77.1/235 = 32.81%

However, as tyre profiles are in 5% increments, you must use a 35 profile.

As a 235 doesn't come widely in a 35, the fitment is a 40 profile.

i remember trying to get road worth for my car and one guy wouldnt give it to me cause my rears were too wide, though when i went to another guy he didnt even mention it and still gave me roadworthy so ye its always a different answer

Widest legal rim is largest factory rim width plus 1 inch.

You can go as large in diameter as you want, as long as the overall diameter of the wheel and tyre doesnt change by 15mm or something, cant remember exactly.

Look it up on the vicroads website

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
×
×
  • Create New...