Jump to content
SAU Community

Widest Legal Rim Size For Vicroads


Recommended Posts

Hey guys,

Sorry if this has been posted before.

But does anyone know what the widest legal wheel and tyre size is for an R33 GTST?

I've looked up vic roads, and as confusing as it is something about 25mm from the stock wheel on the model, but i've been told it can be any model variation of the car so does this mean 25mm ontop of the GTR wheels sizes?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/95304-widest-legal-rim-size-for-vicroads/
Share on other sites

there's a heap of rules with wheel sizes, but from what i learnt when speaking to vic roads (not for skyline however) its on the largest factory option.

Now, with the fords, eg, the AU series, they used to include the XR's. so basically, XRs had the 17" option from factory, so that meant the standard falcons with 15 or 16 inch rims could use the XR spec largest option and get bigger wheels that way.

not sure if they do it the same way for 33 GTS-T/GTR, but they could probably tell you that 1 if you rang and asked it specifically

Dont ask vicroads, they know shit, well if you talk to 5 people you will most likely get 5 different answers. In regards to wheel sizes. You may not go more than 1 inch (25mm) wider and no more than 15mm bigger in total rolling diameter. So in regards, if you look at the fords as dezz made an example of. Im sure the standard falcon with 16's or 15's (shrugs) has higher wall tyres than the xr's to keep the same rolling diameter. But i could be wrong, dunno for sure.

Ring up an engineer, and he will explain to you that you cannot change the trackwidth of the tyres.

Thats about it. Good luck

yeah, most people think that the rule is 2 inches bigger (diameter) than the largest factory option, but the guy i spoke to at vic roads gave me the detailed rules, and its all about maintaing the same rolling diameter (or staying within the limit which is like 15mm as james said)

thats why you have to lower your tyre profile the bigger your rims are...

well the tyre profile, 225 + 15 = 240, whats the gtr wheel sizes ??? u would get away going on the gtr tread sizes

Coupe this - that's not how profiles work

so what then is the max tyre profile? 225?

Jive - that's the width...

I don't get what either of you are talking about.

profile is a percentage of the tyre witdh:

eg. 225/50/16 will give a sidewall height of 50% of 225 = 112.5mm

and if (for arguments sake) a tyre size is:

385/35/18, the sidewall height is 35% of 385 = 135.75mm

Therefore, "low profile" does not always equal skinny side walls.

Example:

stock skyline R33 gtst tyre size is 205/50/16 (by memory)

therefore total rolling diameter is:

16" ----> 406.4mm

add sidewalls (two sidewalls) = 2 x 205 x 50% = 205mm

equals 611.4mm.

if then you go to an 18" wheel, you will have to drop the profile to match the rolling diameter, working backwards

say we want to fit a 235 width tyre:

18" ----> 457.2mm

therefore the sidewalls must be 611.4 - 457.2 = 154.2

therefore each sidewall is 77.1mm

as 77.1mm is a percentage of the width, the profile is 77.1/(tyre width)

profile = 77.1/235 = 32.81%

However, as tyre profiles are in 5% increments, you must use a 35 profile.

As a 235 doesn't come widely in a 35, the fitment is a 40 profile.

i remember trying to get road worth for my car and one guy wouldnt give it to me cause my rears were too wide, though when i went to another guy he didnt even mention it and still gave me roadworthy so ye its always a different answer

Widest legal rim is largest factory rim width plus 1 inch.

You can go as large in diameter as you want, as long as the overall diameter of the wheel and tyre doesnt change by 15mm or something, cant remember exactly.

Look it up on the vicroads website

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...