Jump to content
SAU Community

WTF is up with my BOV!! i have 2!!


Recommended Posts

Guest | hype^ |

check this out guys!!

when i bought the car i thought it had a stock BOV on .. but today i saw a piece of metal with "blitz" on it.. under the air box

im like cool iv got sumthin thats blitz...

i take a closer look and its a F**kn bov!!!

some idiot but a blitz bov on the car under the airbox and left the stock 1 there!!

and coz the stock 1 is ferther back the blitz 1 doesnt even get to go off!! it aint loud at all..

u cant hear the bov properly when u just rev it on the spot! only a lil on changes!!

what the hell do i do??

i was thinking of swaping the blitz and stock bovs around so the blitz 1 is the 1 used first for better sound..

or maybe replace the stock 1 with the blitz and some how block the hole where the blitz 1 was off (iv got nfi how to block it!)

what do uz recon??? :P

Link to comment
https://www.sau.com.au/forums/topic/958-wtf-is-up-with-my-bov-i-have-2/
Share on other sites

mine is right next to my intercooler, and if anyone on these boards has heard it, they will agree with me when i say it is BLOODY loud!!!!

My stock one just blocks up that piping..

see...

Guest | hype^ |

dam prank! nice position! - my blitz is right under the airbox :P iv got no idea why they put it there.. but it should sound better after i remove the airbox and get a filter ;)

prank.. the problem with mine was that the stock was not blocked off..

so the air was filtering through the stock 1 and didnt have a chance to get to the blitz.

i fixed it today..;)

i but a piece of metal between the piping and the stock valve..

now he air goes straight to the blitz bov!

sounds nice!!!

but i need more boost and a POD filter and exhaust ;) to make it sound louder:uh-huh: :D;)

yeah. its VERY loud there... if i hit boost hard through any tunnels (spesh the harbour tunnel) it is seriously deafening. My whole front bar shakes when it goes off.

Yeah, i luuuurve my DTMS!! :P:D (thanks too).

JiMb0 experienced my bov at low boost last w/end. ;)

Guest | hype^ |

YEH PRANK!!

was i impressed or what!!!

did i hear u right in saying that it was only 2pound!??

that thing was loud as hell!!

:uh-huh:

i like the way u pulled right up next to my window with the wheel.. :lol:

and i got laughted at by prank's gf when i showed him mine,!

i cant believe its the same valve!!!:eek:

that was Bec 2. :) I have 2 becs, my gf and my other bec (a good friend) - that was my friend Bec, not my gf.... it gets confusing.

yeah, when i lifted off it had only hit 2psi. :) or thereabouts.

GTR80Y, i need to angle the valve upward!! ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
×
×
  • Create New...