Jump to content
SAU Community

Recommended Posts

Had my line for 1 1\2 yrs now and learnt some hard lessons along the way.

First DONT drive over drive gutters fast! If your stuck go at a huge angle or back out, you drive in and its fine but try to get out! Your front bar will love you.

If you have no ABS expect to lunch front tyres as some idiot pulls out in front (twice), these are a cast iron block, I now run a harder compound which seem to handles it better.

Drift is quite tricky with the Hicas trying to correct you, allthough the harder compound makes it easier.

If you change anything on the standard set up, alot more needs to be done than just the one thing.

Link to comment
https://www.sau.com.au/forums/topic/95940-all-new-skyline-owners/
Share on other sites

Hey this could be a really good thread if everyone chips in a bit on what they've done and shouldnt have.

Here's mine. If you've got vents in your bonnet so you cover up your air filter with, say, a plastic bag to stop water in the intake when you wash the car, REMEMBER TO TAKE THE BAG OFF BEFORE YOU DRIVE IT!!!! Ive only had my skyline two weeks and i already stuffed up.

Need a new air filter now... laugh it up

Edited by Freeman

Cheek up on wat mods you want on this form chanses are 1 of us has been there and done that + we should have a thread about the good products we have brought and make it a sticky

+ dont lend it to your misses and let her drive with high heels she will put the heel through your car carpet

When shopping for fully sick jap wheels with heaps of dish, make sure u take into consideration not only offset but brake disk clearance! Just because the wheels have the correct offset and look good doesn't mean they'll fit properly. I learnt the hard way.

dont accelerate around corners in the wet, unless you dont like your neighbours front brock fence.

LOL DID THAT after i got my line for 2 month!! smashed into "Welcome to Strathfield" sign !!!!! and cops drove pass....gave me a hard time and a fine!!!! they didn't even see the accident!!! OMG

SO DON'T REV TOO HARD IN RAINING DAYZ ON 2ND GEAR!!!!

Had my line for 1 1\2 yrs now and learnt some hard lessons along the way.

First DONT drive over drive gutters fast! If your stuck go at a huge angle or back out, you drive in and its fine but try to get out! Your front bar will love you.

If you have no ABS expect to lunch front tyres as some idiot pulls out in front (twice), these are a cast iron block, I now run a harder compound which seem to handles it better.

Drift is quite tricky with the Hicas trying to correct you, allthough the harder compound makes it easier.

If you change anything on the standard set up, alot more needs to be done than just the one thing.

Oh bro, thanks for the tips man.

So, i shouldn't dive into driveways @ 40 kmh.

I should watch out for idiots pulling in front of me, coz my cast iron block ruins my tyres. Must get harder compound tyres.

I shouldn't attempt to drift with the Hicas enabled. Can i put a switch to it bro, so i can turn it off when i wanna drift. Again, must get harder compound tyres.

I shouldn't change anything on the standart setup or be prepeared to change more than one thing.

Thanks again bro, your words of wisdom really helps. This should be a sticky.

OH also, i must not accelerate around corners in wet.

lol.

yeah gutters are bitches. gutter rash is not yout freind.

corners in the wet is fun if you know how not to end up in fences or poles.

hicas and drift.... disable hicas if you want the car specifically for drifting. otherwise dont worry about it.

and most of the other stuff is common sense. :angry:

and most of the other stuff is common sense. :angry:

Common sense ??? WTF does that mean...? Are you calling all his senses common..?

I would like to add some valuable input to this thread as well :

If it's raining, do not go outside unless you are prepeared to get wet.

If you are running low on fuel, go and fill up. In a most likely event, you will run out of fuel.

If you just had a shower, put clean undies on. Dirty ones must be washed.

Whatch out (is this a new term for clocking off ?)for some cars that like to rev alot and break into lots of wheelspin too. (EDIT: Damn it someone else mentioned ity already)

Don't drive with your high heels on unless you are from Perth. :)

Hope these help.

if you get a stagea, be prepared to get called a volvo driver. then get blank looks when you tell them its a stagea. then watch the jaws drop as you pop the hood, showing them WHY your volvo smashes the idiots fully SIC SS commondore.

oh and finding ANYthing for your car bodywise is a bastard. operator? get me japan!

no. i mean......

this whole thread is really just common sense. like anyone could tell you that not taking gutters sideways in a low car will f**k your front bar good, or giving it a heap of shit in the wet will cause it to go sideways.

if you dont know stuff like that..... you proly shouldnt be driving a skyline.

no. i mean......

this whole thread is really just common sense. like anyone could tell you that not taking gutters sideways in a low car will f**k your front bar good, or giving it a heap of shit in the wet will cause it to go sideways.

if you dont know stuff like that..... you proly shouldnt be driving a skyline.

Just piss off with your common sense bullshite dude...

If you don't have anything valuable to contribute, than don't at all.:(

Here are my other pointers that i learnt the hard way :

If it's too dark to see, turn your headlights on.

You teach a child to read, and he or her will be able to pass a literacy test.

A verbal contract isn't worth the paper it's written on.

Man piss in wind, wind piss back.

He who sleep with itchy asshole, he will wake with smelly finger.

Fool me once, shame on... shame on you. Fool me... you can't get fooled again !!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...