Jump to content
SAU Community

Recommended Posts

There are 2 cefiros in the driveway and 1 has to go, located in adelaide, prefer SA buyers, mods as follows

ENGINE

RB20det manual

manual conversion done in Australia

R33 gtst turbo

3 inch one piece dump and front pipe

Apexi cat back system

600x300x76 front mount kit

HKS pod filter

Dr drift boost controller

Bosch 040 fuel pump

SUSPENSION AND DRIVELINE

Tein HR coilovers height and camber adjustable

9.5kg/mm front and 7.5kg/mm rear springs

front strut brace

Extreme 5 puk single plate clutch

KAAZ 2 way LSD

EXTERIOR

factory front and rear bars

aftermarket side skirts unknown brand

AVS model 6 rims 16x7 front and 17x7 rear

INTERIOR

R32 gtst front seats

aftermarket steering wheel unknown brand

alloy shift knob

drift handbrake button

oil temp / water temp / boost gauges

PRICE

$13,200 negotiable

EXTRA INFO

Mechanicaly the car is fine and has been serviced regularly. A dyno run after the front mount and pump were installed made 152rwkw at 0.8 bar with no tuning running very rich 10.5 : 1 air fuel. The body is generally good except the bonnet lets it down. It has two dents near the front edge and the holes from previous bonnet pins have rubber inserts in them like you can see in the photo. Interior is in excellent condition with only the passenger side vent surround missing. Aircon has been removed but is available. It has seen 3 drift practice days but as it arrived in OZ with auto I assume it has only been thrashed by me. Im not on the forum often maybe every few nights so if your genuinly interested call Chris on 0401 483 906

http://www.skylinesaustralia.com/photopost...o/19222/cat/513

http://www.skylinesaustralia.com/photopost...o/19223/cat/513

http://www.skylinesaustralia.com/photopost...o/19224/cat/513

http://www.skylinesaustralia.com/photopost...o/19225/cat/513

http://www.skylinesaustralia.com/photopost...o/19226/cat/513

Link to comment
https://www.sau.com.au/forums/topic/96065-a31-cefiro-rb20det-turbo-manual/
Share on other sites

hay champ, i seen u out at Lala on the weekend in the sr ceffy, u were doin gd!!

I actually live just on the next road from u! I am keen to have a look at the car so pm me or somethin so i can have a chat!

cheers Josh

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...