Jump to content
SAU Community

Recommended Posts

most of the time when i quick shift from 1st to 2nd gear i can feel the gears crunching together, but you dont hear much of a crunching.but if i gear down e.g- from 4th to 2nd it never crunches.

if im driving normally from 1st to 2nd it doesn't crunch at all.

recently did a gear box oil change using standard oil, and was doing it before oil change.

would it be my 2nd gear syncros.

i heard mayb using redline oil may help..

anyone got any suggestions....cheers

Link to comment
https://www.sau.com.au/forums/topic/96264-crunching/
Share on other sites

Hi mate...

I've got similar problems...

I've got an R33 RB25DEt and I love it.. My transmission is fine at slow changes and quick shifting but as soon as I get over about 120km/h... whenever I change gears... the teeth grind...

I've been told the syncros are half stuffed.. I don't really know much about transmissions so if anyone else can shed some light on the subject, that'd be great.. I could reccommend changing your oil as well... get some good oil this time..

Link to comment
https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1745175
Share on other sites

Redline or use some slick50 treatment. Or Nulon. I think Slick is the best. Couldhelp reduce the problem. Since you have already replaced the oil I would buy a ttreatment of some sort...siphon out a little gearbox oil and add the treatment. Drive for 1000kms see if it gets better...If not - take out a little bit more and add another additive...

Not sure if it will be bad to mix but the box doesnt sound thmuch good anyway...

Redline is more just a decent gear oil - I think the traeatments have more of a chance of working.

Edited by benl1981
Link to comment
https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1745471
Share on other sites

I just changed the oils in my r33 gtr to redline synthetics and the gearbox is alot smoother however I am now getting a clunking noise in reverse that is amplified by this oil. I have been told the noise is normal though but it is anoying.

Would recomend it though as it was stiff through the gears before and had a it of a whirring sound coming from the drivetrain that has significantly been reduced.

sb..

Link to comment
https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1749978
Share on other sites

i changed my gear box oil to reline synthetic. so far ive driven 150 k's after changing the oil. changing into 2nd doesn't grind and crunch anymore, and the gear shifting has gone smoother. I did not adjust my slave cylinder as the mechanic said i only needed to adjust it if it was crunchin in every gear. So far so good.

Thanks for the help!

Link to comment
https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1753137
Share on other sites

I had synchro issues with 2nd & 4th gears..

Changed to Redline Lightweight Shockproof, synchro issues resolved.

I would rather try a $130 high grade oil first than get my box pulled down and the synchro's replaced.

Hmmm let me see which is it $130 or $1500 for parts and labour getting the box pulled apart..

Link to comment
https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1756664
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...