Jump to content
SAU Community

Recommended Posts

car recently had a major service at subaru $900

148,000kms

has a daiken heavy duty clutch reinforced second gear

iridium spark plugs

blitz fatt

hks front mount intercooler

hks pod filter

blitz adjustable blow off valve xforce exhaust

brand new 18' wheels and tyres work vs-sd rims painted in white with nankang low profile performance tyres(over 90% tread) lowered on king springs super lows

xplod headunit

pioneer front

polk rear

boxed 7x10' kenwoods in rear kicker amp

updated to myoo grille,bonnet and bumpers

nardi sterring wheel and apexi gearknob

dark tint

upgraded brake pads.

can supply most stock parts if needed and body kit. never been boosted before!

has 9 months rego and roadworthy!

The car is getting slotted rotors put on in the next week or two aswell!

Im asking around 17,500 or somewhere around that figure.

Willing to swap for a clean fairly modded r32 gtst. let me know if u r interested

0413 021 731 [email protected] or PM me

Edited by ..--R32--..
Link to comment
https://www.sau.com.au/forums/topic/96483-1997-wrx-for-sale-swap/
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...